Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Home / Plasticware

NLP-41 DESICCATOR VACUUM

  • Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
  • Polypropylene and polycarbonate, autoclavable. Clear, moulded rigid and transparent polycarbonate top dome, gives a clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. Polypropylene lower body. Flange with an internal groove to hold a silicon rubber O-ring. With a thick perforated polypropylene disc having a big hole in the centre for easy lifting. The tiny holes in the disc provide air thorough and support to the dishes. Cat. No. Size Flange O.D. (mm) I.D (mm) 40.01 150 171 150 40.02 200 232 199 40.03 250 276 240

As above but with stopcock. Can hold vacuum up to 740 mm. of Hg for 24 hrs. without any greasing. Polypropylene stopcock, fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off and vacuum releasing.

SKU: NLP-41 Category: Plasticware
  • Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
  • Polypropylene and polycarbonate, autoclavable. Clear, moulded rigid and transparent polycarbonate top dome, gives a clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. Polypropylene lower body. Flange with an internal groove to hold a silicon rubber O-ring. With a thick perforated polypropylene disc having a big hole in the centre for easy lifting. The tiny holes in the disc provide air thorough and support to the dishes. Cat. No. Size Flange O.D. (mm) I.D (mm) 40.01 150 171 150 40.02 200 232 199 40.03 250 276 240
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • NC- 17 HPLC VIALS Glass vials are the most commonly used type of HPLC vials, as they offer excellent chemical resistance, low extractable/leachable levels, and high clarity, which makes them ideal for many applications. The most common material used for HPLC vials is borosilicate, due to its resistance to thermal and chemical attack. HPLC (High-Performance Liquid Chromatography) vials are used to store and inject samples into HPLC instruments Pre cleaned : These are precleaned vials in Clear as well as Amber color. Septa Cap: Polypropylene screw cap with precision-fit septa provide an evaporation-proof seal. Bi-layer includes silicone and PTFE. Silicone septa for multiple injections. PTFE-lined screw cap for organic samples. EASY TO DISTINGUISH: Writing patch for sample identification or labelling. TIME SAVING : Short-thread caps and vials require fewer turns to make a tight seal, saving time, especially considering how often vials need to be opened and closed, and how many samples you have. WIDE RANGE OF APPLICATIONS: These headspace vials and caps are ideal for most standard HPLC and GC applications and high-throughput analyses. The lab vials can be used in high-performance liquid chromatography and gas chromatography for reliable analysis results. Large target area for needle Closure type screw top vial large opening, (6 mm) 1.5ml-2 ml  Screw-thread Clear Vial with write on spot, PACK OF 100 100pcs 1.5ml-2 ml  Screw-thread Amber Vial with write on spot 100pcs NC-17 HPLC VIALS
  • NPH-07 TELETHERMOMETER For measuring the temperature of laboratory animals The Digital Tele-Thermometer is ideal for continuous monitoring of temperature in laboratory animals for study and research in anaesthesia, cardiac surgery, hyperthermia & pyrogen testing. PVG’s Digital Telethermometer is an ideal, low cost, accurate and easy to operate instrument useful for pyrogen testing in pharmaceutical industries. Telethermometer multichannel with 6 probe, so temperature of six animals can be checked at one time. Extremely useful for Pharmaceutical Labs Highly Accurate and Easy to Operate 3½ Digit 7-Segment Display Six Temperature Probes NPH -07 COLLOIDAL BALL MILL, MOTOR DRIVEN
  • Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust. NLP-41 DESICCATOR VACUUM
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NLP-41 DESICCATOR VACUUM” Cancel reply

Related products

CENTRIFUGE TUBE CONICAL BOTTOM
Add to wishlist
Quick View

Plasticware

NLP-24 CENTRIFUGE TUBE CONICAL BOTTOM

CRYSTAL MODEL SET
Add to wishlist
Quick View

Plasticware

NLP- 06 CRYSTAL MODEL SET

This cell scraper, provides an excellent option for cell scraping purposes in microbiology. Cat. No. Size mm. 27.01 240 27.02 300
Add to wishlist
Quick View

Plasticware

NLP-27 CELL SCRAPER

These Animal Cages provided with a Stainless Steel grill at the bottom of the cage to give a clean surface for the species to move on. Cat. No. Size mm 2.01 290 x 220 x 140 2.02 430 x 270 x 150
Add to wishlist
Quick View

Plasticware

NLP-02 ANIMAL CAGE (TWIN GRILL)

With round bottom, in polypropylene & polycarbonate These tubes have excellent clarity and are strong enough to be used 50,000 x G. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength. Capacity........16 ml. 50 ml. in PP & PC both.
Add to wishlist
Quick View

Plasticware

NLP-25 CENTRIFUGE TUBE ROUND BOTTOM

ATMIC MODLE SET SENIOR
Add to wishlist
Quick View

Plasticware

NLP-03 ATOMIC MODEL SET SENIOR 370 BALLS

Polypropylene, have excellent contract clarity and can used up to 50,000 x g. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4˚C. Cat. No. Capacity ml. 26.01 30 26.02 50 26.03 100
Add to wishlist
Quick View

Plasticware

NLP-26 CENTRIFUGE TUBES OAK RIDGE

BURETTE ACRYLIC
Add to wishlist
Quick View

Plasticware

NLP-10 BEAKER, TPX (PLOY METHYL METHACRYLATE)

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

026267

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2026 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha