Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
For measuring density of liquids. Brass beam with agate knives and agate bearings. Nickel-plated column adjustable in height up to 300 mm. Supplied complete in a wooden case which also serves as its base; with plummet and platinum wire suspensions. Five rider weights, a glass cylinder of capacity 70 ml. Glass plummet with o o thermometer of range -4 to +30 C.
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-62 BALANCE DENSITY

  • BALANCES ANALYTICAL
  • Capacity 3110 gm., sensitivity 0.1 gm. Mild steel stand fixed on sunmica pasted wooden platform of size length x breadth 480 x 245 mm.; with four levelling screws. Three graduated engraved beams, first and second aluminium beam graduated 0-10 x 0.1gm., 0-100 x 10 gm. and third nickel-plated brass engraved 0-3000 x 100 gm. Each beam with a non-removable weight. Zero adjusting device on the left hand end. Single removable stainless steel pan of diameter 210 mm. Dimensions: Length x Height 500 x 520 mm.

For measuring density of liquids. Brass beam with agate knives and
agate bearings. Nickel-plated column adjustable in height up to
300 mm. Supplied complete in a wooden case which also serves as
its base; with plummet and platinum wire suspensions. Five rider
weights, a glass cylinder of capacity 70 ml. Glass plummet with
o o
thermometer of range -4 to +30 C.

SKU: PM-62 BALANCE DENSITY Category: Chemistry - General & Chemical Laboratory Apparatus
  • BALANCES ANALYTICAL
  • Capacity 3110 gm., sensitivity 0.1 gm. Mild steel stand fixed on sunmica pasted wooden platform of size length x breadth 480 x 245 mm.; with four levelling screws. Three graduated engraved beams, first and second aluminium beam graduated 0-10 x 0.1gm., 0-100 x 10 gm. and third nickel-plated brass engraved 0-3000 x 100 gm. Each beam with a non-removable weight. Zero adjusting device on the left hand end. Single removable stainless steel pan of diameter 210 mm. Dimensions: Length x Height 500 x 520 mm.
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-62 BALANCE DENSITY” Cancel reply

Related products

Transparent plastic, hypotenuse 135 mm., sides graduated 0-4.5 inches x 0.1 inch and 0-57 mm. x 1 mm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

SET SQUARE 60o

Specification: • Upholstered seat • Steel framework • Revolving top • Height adjustable using pneumatic gas spring
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-02 LABORATORY STOOL

Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-381 FLASK, ROUND BOTTOM, WIDE NECK

With screwed base for fixing.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-14 GAS TAP SINGLE, PILLAR MOUNTED

Four legs, painted mild steel, seat diameter 30 cm , height adjustable from 45 to 65 cm. Stainless steel or nickel plated top and legs with rubber covered tips.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-03 REVOLVING STOOL – STEEL

Seamless stainles steel or double walled s.s with safety valve and reinforced bakelite heat resistant handles, safe to operate, with pressure gauze and safety valve level, with a rubber ring gasket fits in the lid so as to make the closure absolutely leak proof. Size, seamless Cat. No. Dia x Depth mm. 40.01 300x300 40.02 350x450 Vertical Double Wall Cat. No. Dia x Depth mm. 40.01 250x400 40.02 300x500 40.03 350x550 40.04 400x600 40.05 450x600 40.06 550x750
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-40 AUTOCLAVE STAINLESS STEEL

Four taps, each mounted at 90° to the next.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-18 GAS TAP, FOUR WAY, PILLAR MOUNTED

Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-39 AUTOCLAVE

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

013401

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha