NPH- 28 DISSOLUTION RATE TEST EQUIPMENT

Tablets or capsules taken orally remain one of the most effective
means of treatment available even today. Tablet Dissolution is a
standardized method for measuring the rate of drug release from a
dosage form.
• Extremely Useful for Pharmaceutical Labs Demonstration
• Accurate with Digital Temperature , RP.M Panel and Easy to
Operate
• Easy to Empty & Clean the Water bath with Bottom Drainage
1,2,3,6 ,8 Station Model
Apparatus consists of A water bath with 500 W heater covered
1000 ml glass vessel and a digital temperature controller. Variable
speed motor, with 30 cm. long 6 mm. dia. Stainless steel shaft. A
cylindrical stainless steel basket and a membrane fixing
attachment, water bath of thick acrylic sheet with transparent
cover at top. Temperature of the bath is maintained at 37°C with an
accuracy of +/-_ 1°C. A cylindrical glass vessel of capacity 1000 ml
with slightly concave bottom has a flanged edge at the top to
accept a fitted cover having four holes. One hole is in the center.
The shaft of motor fitted on an upright and has an electronic
speed regulating device that allows the speed to be varied from 25
to 250 R.P.M. The shaft, with basket fitted at the end rotates
smoothly and without any perceptible wobble. Basket consist of
two parts, one of which is to be attached to the shaft of solid metal
except for 2 mm vent and is fitted with three springs clips that
allows removal of the lower part of the basket to admit the test
samples, the detachable part of basket is of stainless steel mesh
formed into cylindrical 3.6 x 2.5 cm dia. Works 220 volts 50 Hz A.
C. Available models are
( i ) Single Stage (ii) D ouble Stage (iii) Three Stage (iv) Six Stage
(iv) Eight Stage (b) same as above but analog type single stage.