Add to wishlist
Anodized aluminium body with three heat resistant plastic feet, with a set of concentric aluminium rings and one centre disc. Heating by 1 kW heater. Supplied complete with a connector plug and one meter of three core cable for use on 220 V 50 Hz AC. Cat. No. Dia. X Ht. mm. 96.01 200x150 96.02 250x150 96.03 325x150

PM-96 WATER BATH CIRCULAR, ELECTRIC

Anodized aluminium body with three heat resistant plastic feet,
with a set of concentric aluminium rings and one centre disc.
Heating by 1 kW heater. Supplied complete with a connector plug
and one meter of three core cable for use on 220 V 50 Hz AC.

Cat. No. Dia. X Ht. mm.
96.01 200×150
96.02 250×150
96.03 325×150
SKU: PM-96 WATER BATH CIRCULAR, ELECTRIC Category:

Reviews

There are no reviews yet.

Be the first to review “PM-96 WATER BATH CIRCULAR, ELECTRIC”

Related products

Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-381 FLASK, ROUND BOTTOM, WIDE NECK

Screwed lower end, with one angle tap.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-09 WATER TAP SWAN NECK

Ceramic of high quality fireclay, with hard white glaze, with an outlet in the center of base at one end. Cat. No. Size mm. Make Material  Type 5.01 450x300x175 Ceramic Single 5.02 600x450x250 Ceramic Single 5.03 450x400x200 Stainless Steel Single Bowl 5.04 600x450x225 Stainless Steel Single Bowl 5.05 925x450x200 Stainless Steel Double Bowl 5.06 1125x500x225 Stainless Steel Double Bowl
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-05 LABORATORY SINKS

Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-39 AUTOCLAVE

Transparent plastic, hypotenuse 135 mm., sides graduated 0-3.5 inches x 0.1 inch and 0-77 mm. x 1 mm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

SET SQUARE 45o

This chair ensures high comfort levels during work. Features a high mobility hand grip slot and also a sturdy lumbar support, with adjustable armrest for added comfort during work. Very easy to assemble, No tools required in order to install the chair. A safe and reliable chair, one that can make a lot of research hours seem like minutes.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-01 LABORATORY CHAIR

PM- 15 GAS TAP DOUBLE A gas tap, or gas valve, is a device that controls the flow of gas through a pipe from its supply source. They are essential devices in a range of chemistry and physics exercises, from the basic level all the way up to commercial, industrial, or research laboratories. PVG’s Gas taps are of Best  quality , Brassin Chrome plated or black powder coated for laboratory use Long life, Provides precise control over gas flow for experiments and processes Can be  used with a variety of gases commonly used in laboratory applications. Heavy construction ,Leak proof, tested, accurate, meets the safety standards required for laboratory equipment Ideal for educational institutionsie in Chemistry Labs., Research facilities, and industrial laboratories where control of Gas is required. Lever handle easy to install with brass adapter. Mounted at 90 Degree. PVG INTERNATIONAL’s Gas taps are  Direct, Single, Double, Triple Four way Pillar Mounted .
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-15 GAS TAP DOUBLE, PILLAR MOUNTED

Placeholder
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-348 PROTRACTOR, FULL CIRCLE