Add to wishlist
Good quality , Sturdiness, Smooth finish Analog measuring device for measurement of Length and Breath of Seeds

NAP-12 SEED DIAL CALLIPER

Good quality , Sturdiness, Smooth finish
Analog measuring device for measurement of Length and Breath
of Seeds

SKU: NAP-12 SEED DIAL CALLIPER Category:

Reviews

There are no reviews yet.

Be the first to review “NAP-12 SEED DIAL CALLIPER”

Related products

• Safe, Easy to use, Provide a controlled Environment • Robust construction, with Accurate controls, • With Long Trouble free Life Double walled construction, Outer chamber of thick mild steel with rust proof powder coated paint; Inner Chamber of Stainless steel ; Gap of 75 mm between outer and inner is filled with glass wool to prevent thermal loss; Provided with double door, so as there is no contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors inner made of thick transparent full view glass and outer door is double walled mild steel. Whole unit is mounted on castor wheels for easy movement. With a self cooled air circulation fan to maintain uniform temperature and Humidity through out the chamber; Humidity is controlled with Humidistat. Inside water tank of stainless steel. All the electronic controls given on the front panel. With thermal fuse. Technical Specification Temperature Range : From ambient to 60°C ,controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller. Humidity range: Up to 95% and controlled by Dual Display Microprocessor PID Digital Humidity Indicator cum Controller. Shelves : Two or Three Power : 220 V 50 Hz A.C Mains Size of the Inner Chamber : Any other size can be made as per the customers requiremen.
Add to wishlist
Quick View

Agriculture Equipment

NAP-16 HUMIAMBERDITY CHAMBER

Suitable for testing physical purity of Grain/Seed samples. Suitable to be used to distinguish, discolored, damaged wand chalky grains/seeds. Light below the rectangular 8’’ x 5’’ opal glass
Add to wishlist
Quick View

Agriculture Equipment

NAP-10 PURITY WORKBOARD

GRAIN/SEED DIVIDER BOERNER TYPE This Boerner Divider  is commonly used in seed laboratories and agricultural research institutions. The Boerner Divider reduces the size of a grain sample while maintaining the equal distribution of the original Sample. This is utilized to obtain representative samples of seeds for testing purposes. It helps in accurately dividing and reducing a bulk seed sample into smaller, manageable portions for further analysis. The basic operation of the Boerner Seed Divider involves pouring the bulk seed sample into the top of the device, which then uses a series of trays, chutes, and oscillating movements to separate and divide the seeds. The result is a set of sub-samples that are more representative of the entire seed lot. Made of Brass with Hopper capacity  1000 gm. No electricity is required to operate this divider. Mechanically operated this divider works on gravity principal  Provided with two collecting pans. Number of pockets are 38, Steel Legs and support.
Add to wishlist
Quick View

Agriculture Equipment

NAP-01 GRAIN/SEED DIVIDER BOERNER TYPE

NAP-09 SEED TESTING KIT Seed testing kits are used to evaluate the quality of seeds, including their germination capacity, purity, and health. The results of seed testing help determine if seeds are suitable for planting and can help predict how well they will grow in the field. The main objective of seed testing is to assess the actual planting value of the seed in terms of its germination capacity besides determination of percentage composition of the pure seeds, weed seeds, other crop species, extraneous matter and moisture content of the submitted sample. Uses of seed testing kits Seed certification: Seed testing helps ensure that seeds are high quality and genetically pure. Seed treatment: Seed testing helps determine the best treatment for seeds. Quarantine: Seed testing helps prevent the spread of disease to new regions. Germination testing: Seed testing helps determine how many seeds will germinate in the field. Seed viability testing: Seed testing helps determine how many seeds are alive and how many are dead.
Add to wishlist
Quick View

Agriculture Equipment

NAP-09 SEED ANALYSIS KIT

Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.
Add to wishlist
Quick View

Agriculture Equipment

NAP-11 SEED GRADING SIEVES

Can measure two measurements, Moisture and Temperature. Can measure the moisture of paddy, rice, wheat, and corn. Grains : Paddy, Rice, Wheat, etc. Measuring Range : Moisture: 8~20 % Temperature: -10~55 °C Accuracy Moisture: ±0.6% (Under 14 %) Temperature: ±0.8 °C ±0.8% (15~18 %) ±1% (Over 18 %) Resolution : 0.1 Display : 4 Digits, 10 mm LCD Power Supply : 4 x 1.5V AA Size (UM-3) Battery Dimensions Unit : 182 x 68 x 38 mm Probe: 368 x 44 x 25 mm Mass : 420 g (Not Including Batteries) Standard Accessories: 1. Main Unit 2. Probe 3. Carrying Case 4. Operation Manual
Add to wishlist
Quick View

Agriculture Equipment

NAP-31 MOISTURE GRAIN METRE

Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel frameworkofstainlesssteeltubularormildsteelwiththick SalientFeatures Efficiency :99.97% (or above) down to 0.3 micron. Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm Discharge :Air volume 90 cfm =10% Noise level :Below 65 db Illumination :Byfluorescenttubeasper sizeofworkingarea Germicidal :By ultra-violet tube (on Request)(Approx 50 microwattspersq. cmontheentireworksurface) Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage. Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional) Support Stand: Stainless steel square pipe stand with levelling device (Optional) Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional) Supplied complete with : H.E.P.A. Filter, pre filter, Centribalanced, Centrifugal Air Succes s ion blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer Standard Dimensions of working area: (I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm. Other sizes can be designed as per customer specification. Note : OptionalAccessories andTest Facilities at extra cost.
Add to wishlist
Quick View

Agriculture Equipment

NAP-20 SUSPENDED LAMINAR AIR FLOW UNIT

NAP-02 PRECISION DIVIDER (GAMET TYPE)
Add to wishlist
Quick View

Agriculture Equipment

NAP-02 PRECISION DIVIDER (GAMET TYPE)