Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
KJELDHAL DISTILLATION ASSEMBLY
Home / Laboratory Glassware / Distillation Assembly & Rotary Evaporators

KJELDHAL DISTILLATION ASSEMBLY

  • KJELDHAL DISTILLATION ASSEMBLY
  • KJELDAHL DISTILLATION ASSEMBLY

Consist of Round Bottom Flask of capacity 1000 ml., Multiple Adapter Two necks, splash head Vertical,  Liebig Condenser, Receiver Adapter and Dropping Funnel of capacity 100 ml.

SKU: ND-12 Category: Distillation Assembly & Rotary Evaporators
  • KJELDHAL DISTILLATION ASSEMBLY
  • KJELDAHL DISTILLATION ASSEMBLY
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • NSG 11 MEMBRANE FILTER HOLDER WITH STANDARD JOINT FITTING A Membrane Filter Holder Assembly is a laboratory apparatus used for the filtration of liquids or gases. It consists of a filter holder and support for a membrane filter, which is placed between the two. The filter holder is typically made of metal and holds the filter in place during filtration. The membrane filter is usually made of a thin, porous material that acts as a barrier to trap particles or contaminants in the liquid or gas being filtered. The holder assembly provides a secure and leak-proof environment for the filtration process and makes it easy to replace the filter after use. Membrane filter holder assemblies are commonly used in water treatment, air quality control, microbiology, and other scientific and industrial applications where precise filtration of liquids or gases is required. PVG’s Membrane Filter Holder with Standard Joint Fitting is a crucial laboratory equipment for the precise filtration of liquids and gases. This useful and reliable assembly consists of a filter holder that securely supports a membrane filter, ensuring effective separation of contaminants. Constructed from durable materials, it is perfect for a range of applications in microbiology, water treatment, pharmaceuticals, and more. Specifications: Membrane Filter Diameter: 47 mm Funnel Cup Volume: 300 mL Clamp Material: Anodized aluminum clamp for corrosion resistance Filtration Flask: Made from heavy-duty borosilicate glass 3.3, designed to withstand high vacuum conditions during filtration. Packaging: In Bubble sheet or Die-cut foam packaging ensures safe delivery and handling of glassware. PVG’s Glassware is printed with chemical-resistant White Enamel colors for life long usage. Standard Joint Fittings Standard joint fittings are used to connect the membrane filter to other components in a filtration system. These fittings are designed to provide leak-proof connections and are often made of materials compatible with the fluids being filtered (like glass, plastic, or stainless steel). Applications: Water Purification: Removing contaminants from drinking water. Pharmaceuticals: Sterile filtration of solutions and drugs. Food and Beverage: Clarifying juices and beverages, or sterilizing products. Considerations: Material Compatibility: Ensure the filter and fittings are compatible with the substances being filtered. Pore Size: Choose an appropriate pore size G1,G2,G3 or G4 based on the desired filtration level. Temperature and Pressure Ratings: Ensure the filter can withstand the operational conditions. Final Conclusion: PVG’s Membrane Filter Holder with all Standard Joint Fitting is used for efficient and reliable filteration, making it an essential component in any Research laboratory filtration setup. MEMBRANE FILTER HOLDER ASSEMBLY WITH MEMBRANE SUPPORT, FUNNEL, FLASK AND CLAMP. RUBBER CORK FITTING
  • Transparent plastic, hypotenuse 135 mm., sides graduated 0-4.5 inches x 0.1 inch and 0-57 mm. x 1 mm. SET SQUARE 60o
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “KJELDHAL DISTILLATION ASSEMBLY” Cancel reply

Related products

Used to produce high purity distilled water, phenol, etc. by simple distillation. Consist of a Flat bottom Flask of capacity of 500 ml., and a matching Graham condenser of jacket length 200 mm. with interchangeable joint 19/26. Borosilicate Glass. Can be supported by Retort stand with two Burette clamp, and the maximum safe operating temperature is 520 degree Centigrade. Supplied complete with Stopper. Heating by with flame method or by Heating Mantles.
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

DISTILLATION APPARATUS

Compact, consists of a flat bottom Flask of Capacity 1000 ml. Erlenmeyer flask, Friedrich condenser of Length 200 mm. and stopper.
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

DISTILLATION APPARATUS

Placeholder
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

MICRO KJELDHAL NITROGEN DISTILLATION APPARATUS

Consist of Round Bottom Flask of capacity 1000 ml., Reversible Coil Condenser.
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

REFLUX ASSEMBLIES

REFLUX ASSEMBLIES
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

REFLUX ASSEMBLIES

Used for determining nitrogen in organic compounds. Consists of a kjeldahl Flask of capacity 500 ml. Graham condenser 200 mm. and a connecting tube.
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

DISTILLATION APPARATUS AMMONIA

ND-22 SOXHLET EXTRACTION APPARATUS Soxhlet is a Standard apparatus for the analytical extraction of solids. Made from high-quality, borosilicate 3.3 glass. Soxhlet extraction is one of the most popular techniques for extraction of analytes from solid materials. Applications include the production of tinctures and aromatic alcohols, food testing, biofuels, environmental analysis of soils, sludge, and wastes. Soxhlet Apparatus complete set of Extraction Glass with Round Bottom Flask ,Extractor and Condenser. PVG’s Soxhlet extractor made from thick wall Boro 3.3 glass offers excellent thermal resistance and chemical stability, ensuring longevity and reliability in laboratory settings. Quipped with  Soxhlet extractor with standard 45/40 joint at top and 24/29 bottom joint, This Soxhlet extractor accommodates various laboratory setups, enhancing versatility for diverse extraction processes. PVG’S Soxhlet Extraction Apparatus is preferred for optimal extraction performance, it maximizes solvent recovery while minimizing loss, making it an essential tool for effective and efficient laboratory extractions. All the Three parts are avialble as Spares also All the size are available with flask capacity from 50 ml to 10 Litre.
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

SOXHLET EXTRACTION APPARATUS

CONTINUOUS WATER DISTILLATION
Add to wishlist
Quick View

Distillation Assembly & Rotary Evaporators

CONTINUOUS WATER DISTILLATION

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

243345

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2026 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha