Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
To demonstrate the principles of steam engine alone or in contrast to those of internal combustion engines. Cutaway, color coded model illustrates the interaction between the slide-valve and piston of a steam engine controlled by a slide-valve. Mounted on aluminium base.
Home / Physics & Electronic Laboratory Apparatus

MS-251 PVG STEAM ENGINE, MODEL

  • This model demonstrates the sequence of operations which take place in the Wankel engine, a concept difficult to explain with ordinary static diagrams. The eccentric motion of the rotor in the double lobed chamber and the 3 to 1 ratio between the rates of rotation of output shaft and the rotor are all readily apparent. Rotor marked with an arrow to indicate the direction of rotation. Water cooling channels in the engine casing shown &, as with the other models in the range, internal passage ways are coloured to indicate the nature of their contents and a small electric bulb is used to indicate the moment of ignition. Overall height 250 mm

To demonstrate the principles of steam engine alone or in contrast
to those of internal combustion engines. Cutaway, color coded
model illustrates the interaction between the slide-valve and piston
of a steam engine controlled by a slide-valve. Mounted on
aluminium base.

SKU: MS-251 STEAM ENGINE, MODEL Category: Physics & Electronic Laboratory Apparatus
  • This model demonstrates the sequence of operations which take place in the Wankel engine, a concept difficult to explain with ordinary static diagrams. The eccentric motion of the rotor in the double lobed chamber and the 3 to 1 ratio between the rates of rotation of output shaft and the rotor are all readily apparent. Rotor marked with an arrow to indicate the direction of rotation. Water cooling channels in the engine casing shown &, as with the other models in the range, internal passage ways are coloured to indicate the nature of their contents and a small electric bulb is used to indicate the moment of ignition. Overall height 250 mm
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Used for collision and pendulum experiments. A set of Twelve piece assortment of solid, hooked, and drilled balls with both 25 mm. and 38 mm. diameters. Supplied in a foam lined plastic box MS-120 PVG ASSORTEDBALLSET
  • LABORATORY CARRIER TRAY PM-843 LABORATORY CARRIER TRAY
  • Hard wood reinforced with metal at the ends, length 300 mm., with three ball bearing wheels, a quick release triple impulse spring pin, with two removable metal pins at each end to enable trolleys of equal mass to be stacked or to give anchoring points for accelerating cords. ELASTIC CORDS For accelerating trolleys, rubber length 175 mm. with eyelet at both ends. TROLLEY MASSES Steel mass equal to the mass of one trolley, with rubber pads. This reduces the number of actual trolleys. SPRINGS - Steel springs to use with dynamic trolleys in the investigation of longitudinal wave motion, length x diameter 50 x 15 mm. Attached by spring holders to the front or rear of a dynamic trolley. In this way a number of trolleys can be joined together. SPRING HOLDER For attaching up to four springs side by side to the back and front of wooden trolleys. Metal plate 115x15 mm. length x width with hole at each end and with two central side metal flaps. TROLLEY RUNWAY Gives a smooth flat easily inclinable surface for experiments. With metal side rails and plastic feet. Dimensions -1.5 x 0.3 M. MS-117 PVG DYNAMICS TROLLEYS
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MS-251 PVG STEAM ENGINE, MODEL” Cancel reply

Related products

150 mm. long plated screw to hold up to four pair of single groove casted light alloy aluminium washers, fastened with metal washer and nickel plated wing nut.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-11 PVG QUICK LOCK CLAMPS

It consist of three light alloy grooved wheels of dia. 80, 50 and 25mm., with a central hole to accept rods of dia. 13 mm.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-27 PVG DRUM

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-25 PVG FRICTION BOARD

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-14 PVG RINGS

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-18 PVG INCLINOMETER

A set of 16 or 21 plane and solid geometric shapes. The plain shapes include triangle, rectangle, square, circle, semi circle, figure with five sides, six sides, eight sides, right angle. Solid figures include triangle, rectangle, cylinder, square, cone, square base pyramid, triangle base pyramid, pentagon, hexagon, octagon, sphere and ellipse. Supplied in a polished wooden box.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-02 PVG GEOMETRICAL MODELS WOODEN SOLID

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-10 PVG RODS

Set of six, comprising one each of Aluminium, Iron, Copper, Brass, Lead and Zinc. Cat. No. Size mm. 4.01 10 4.02 20 4.03 25
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-04 PVG CUBE METAL SET

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

001074

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha