Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
HAND STROBOSCOPE
Home / Physics & Electronic Laboratory Apparatus

MS-335 PVG HAND STROBOSCOPE

  • RIPPLE TANK SUPPLY UNIT
  • Moulded plastic ripple tank, four legs with rubber end caps, legs with leveling feet, tank with drain hole fitted with rubber bung, with plastic or acrylic tray. Metal uprights for horizontal rippler support rod which is adjustable in height. Low voltage D.C. motor mounted on a wooden beam suspended by elastic rubber bands. Motor fitted with an eccentric mass which causes the beam to oscillate. Additional point contact sources are given by two plastic spheres, each on a right angled rod which can be adjusted at any height. Overall size of the tank 580 x 500 x 30 mm. Beam size 280 x30 x 20 mm., drilled to receive rods of point sources and having two hooks. Motor 6 V D.C. with 1 m of wire. Ripples support rod of light alloy with clips to fit upright rods. Metal support rod for lamp 380 mm. long. Accessories : 2 straight obstacles of aluminum length 140 mm. bent at right angles, 1 straight obstacle aluminum length 40 mm. bent at right angle, 1 curved reflector aluminum radius 200 mm., one dropper, 1 foam plastic sponge, 1 wooden roller and a packet of rubber bands. Spares -Rippler motor 6 V D.C., Plastic spheres and 12 V 24 W lamp. • Also Available an economical model in steel for junior students as in the photo, with all accessory

Enables students to study and understand strobe action and
observe motion of low frequency. Consist of a metal disc diameter
255 mm., in matt black finish, with 12- equispaced radial slots of
50×3 mm. With a metal handle having a knob at the end for easy
rotation of disc

SKU: MS-335 HAND STROBOSCOPE Category: Physics & Electronic Laboratory Apparatus
  • RIPPLE TANK SUPPLY UNIT
  • Moulded plastic ripple tank, four legs with rubber end caps, legs with leveling feet, tank with drain hole fitted with rubber bung, with plastic or acrylic tray. Metal uprights for horizontal rippler support rod which is adjustable in height. Low voltage D.C. motor mounted on a wooden beam suspended by elastic rubber bands. Motor fitted with an eccentric mass which causes the beam to oscillate. Additional point contact sources are given by two plastic spheres, each on a right angled rod which can be adjusted at any height. Overall size of the tank 580 x 500 x 30 mm. Beam size 280 x30 x 20 mm., drilled to receive rods of point sources and having two hooks. Motor 6 V D.C. with 1 m of wire. Ripples support rod of light alloy with clips to fit upright rods. Metal support rod for lamp 380 mm. long. Accessories : 2 straight obstacles of aluminum length 140 mm. bent at right angles, 1 straight obstacle aluminum length 40 mm. bent at right angle, 1 curved reflector aluminum radius 200 mm., one dropper, 1 foam plastic sponge, 1 wooden roller and a packet of rubber bands. Spares -Rippler motor 6 V D.C., Plastic spheres and 12 V 24 W lamp. • Also Available an economical model in steel for junior students as in the photo, with all accessory
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Placeholder MS-413 PVG PERSPEX SHEET
  • Flask Lechatelier The Le Chatelier Flask is a specialized laboratory vessel designed for experiments that demonstrate Le Chatelier's Principle, which describes how a system in equilibrium responds to external changes. This flask is commonly used in chemistry labs to study chemical reactions under controlled conditions, such as the effect of temperature, pressure, or concentration on the equilibrium state of a reaction. It features a unique design that allows for safe and precise observation during experiments. Features Ergonomic Design: The Le Chatelier Flask is designed to allow easy mixing and observation of reactions. It typically has a narrow neck and a round bottom for efficient heating and mixing of liquids. Temperature and Pressure Resistant: Constructed from high-quality Borosilicate 3.3 glass, this flask can withstand varying temperature changes and is resistant to thermal shock. Wide Mouth for Easy Access: The wide mouth design ensures easy addition of reagents or substances without spills, making it suitable for various experimental setups. Durable Construction: Made with thick glass to handle thermal stresses, making it ideal for heating and conducting reactions that require high temperature or pressure. Clear Visibility: The transparent nature of the flask ensures that researchers can clearly observe the reaction and equilibrium changes in real-time. Use Cases Demonstrating Le Chatelier's Principle: This flask is ideal for illustrating how systems in chemical equilibrium respond to changes in temperature, pressure, or concentration. Chemical Reaction Studies: Used for conducting reactions where changes in equilibrium are observed, especially in educational settings. Laboratory Research: Widely used in research laboratories for chemical experiments that involve reversible reactions. Educational Institutions: An essential tool in chemistry classrooms and universities for teaching equilibrium concepts. Specifications Material: High-quality borosilicate glass (or another specific material if applicable) Capacity: 250mL, Neck Type: Narrow neck for better control and easier sealing Shape: Round-bottomed design for even heating and efficient mixing Temperature Resistance: Can withstand temperatures up to 500 Degree C. Dimensions: [Provide specific dimensions if available] Color: Clear, allowing easy visibility of contents Why Choose PVG Le Chatelier Flask? PVG ‘s Le Chatelier Flask offers superior design and functionality for chemical experiments involving equilibrium reactions. With its high-quality, durable construction, this flask provides the reliability and precision needed for successful experiments. Whether you are conducting research, performing educational demonstrations, or studying chemical equilibrium, this flask will ensure you get accurate results and clear observations. FLASK  LECHATELIER
  • For natural gas, suitable for working small diameter soda glass tubing. With ceramic head and riffled gas inlet tube of diameter 9mm. Overall height 250 mm. PM-201 BURNER FISH TAIL
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MS-335 PVG HAND STROBOSCOPE” Cancel reply

Related products

MS-28 PVG AXLE
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-28 PVG AXLE

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-25 PVG FRICTION BOARD

Set of six perspex geometrical shapes, consisting of one each triangle, square, circle, rectangle, hexagon  and octagon.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-01 PVG GEOMETRICAL SHAPES

Cast iron with levelling screws, with vertical and horizontal holes to accept 13 mm. diameter rods, each hole with a clamping screw. Overall length 240 mm. mass approx. 2.5 Kg.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-09 PVG FOOT

MS-19 PVG WHEEL
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-19 PVG WHEEL

A set of 16 or 21 plane and solid geometric shapes. The plain shapes include triangle, rectangle, square, circle, semi circle, figure with five sides, six sides, eight sides, right angle. Solid figures include triangle, rectangle, cylinder, square, cone, square base pyramid, triangle base pyramid, pentagon, hexagon, octagon, sphere and ellipse. Supplied in a polished wooden box.
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-02 PVG GEOMETRICAL MODELS WOODEN SOLID

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-22 PVG WOODEN BEAMS

Placeholder
Add to wishlist
Quick View

Physics & Electronic Laboratory Apparatus

MS-06 PVG CYLINDERS METAL

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

001045

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha