Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Home / Plasticware

NLP-41 DESICCATOR VACUUM

  • Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
  • Polypropylene and polycarbonate, autoclavable. Clear, moulded rigid and transparent polycarbonate top dome, gives a clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. Polypropylene lower body. Flange with an internal groove to hold a silicon rubber O-ring. With a thick perforated polypropylene disc having a big hole in the centre for easy lifting. The tiny holes in the disc provide air thorough and support to the dishes. Cat. No. Size Flange O.D. (mm) I.D (mm) 40.01 150 171 150 40.02 200 232 199 40.03 250 276 240

As above but with stopcock. Can hold vacuum up to 740 mm. of Hg for 24 hrs. without any greasing. Polypropylene stopcock, fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off and vacuum releasing.

SKU: NLP-41 Category: Plasticware
  • Provides an excellent option for post wash draining of tubes and bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
  • Polypropylene and polycarbonate, autoclavable. Clear, moulded rigid and transparent polycarbonate top dome, gives a clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. Polypropylene lower body. Flange with an internal groove to hold a silicon rubber O-ring. With a thick perforated polypropylene disc having a big hole in the centre for easy lifting. The tiny holes in the disc provide air thorough and support to the dishes. Cat. No. Size Flange O.D. (mm) I.D (mm) 40.01 150 171 150 40.02 200 232 199 40.03 250 276 240
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Fiber glass, a three part skull, with full dentition. The lower jaw is spring held to demonstrate the movement of the jaw. The calvaria is cut and is removable (fastens with clips) so the interior details can be seen. Suture lines are well defined. YM-08 MODEL OF HUMAN SKULL
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NLP-41 DESICCATOR VACUUM” Cancel reply

Related products

Polypropylene, have excellent contract clarity and can used up to 50,000 x g. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4˚C. Cat. No. Capacity ml. 26.01 30 26.02 50 26.03 100
Add to wishlist
Quick View

Plasticware

NLP-26 CENTRIFUGE TUBES OAK RIDGE

DROPPING BOTTLES, PLYETHYLENE
Add to wishlist
Quick View

Plasticware

NLP-11 DROPPING BOTTLES, POLYETHYLENE

Low density polyethylene bottles, dispense small uniform drops of liquid, these bottle are with screw cap having Lid. Cat. No. Capacity ml. 12.01 15 12.02 30 12.03 60 12.04 125 12.05 250
Add to wishlist
Quick View

Plasticware

NLP-12 DROPPING BOTTLES, SCREW CAP

Also available in Amber colour in same capacity as above. Cat. No. Capacity ml. 14.01 30 14.02 60 14.03 125 14.04 250 14.05 500 14.06 1000
Add to wishlist
Quick View

Plasticware

NLP-14 REAGENT BOTTLES, WIDE MOUTH P.P.

WASH BOTTLE
Add to wishlist
Quick View

Plasticware

NLP-20 WASH BOTTLE

With round bottom, in polypropylene & polycarbonate These tubes have excellent clarity and are strong enough to be used 50,000 x G. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength. Capacity........16 ml. 50 ml. in PP & PC both.
Add to wishlist
Quick View

Plasticware

NLP-25 CENTRIFUGE TUBE ROUND BOTTOM

Polypropylene, are much lighter than glass. These autoclavable, dependable and durable carboys, provided with wide handles making it convenient while carrying pouring purposes Cat. No. Capacity lt. 18.01 10 18.02 20
Add to wishlist
Quick View

Plasticware

NLP-18 CARBOY

Equipped with a leak proof spigot screwed to the body. An excellent replacement for glass carboys and are used for storing and dispensing distilled water , other laboratory solutions. Cat. No. Capacity lt. 19.01 10 19.02 20
Add to wishlist
Quick View

Plasticware

NLP-19 CARBOY WITH STOP COCK

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

026267

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2026 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha