Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Used to store T.L.C. plates. Thick aluminum sheet painted body with stout glass door sealed with rubber gasket with a tray for silica gel desiccant and perforated sheet. Overall Dimentions: I.D. Width x Depth x Ht. 500 x 300 x 350 mm
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-227 DESICCATOR CABINET

  • Economical, Easy to clean powder with powder coated body Accurate, Insulated , Maximum temperature 50°C above ambient, Thermostat control for set temperature Toughened glass doors Used for drying of glassware, or chromatograms and keeping agar based media molten. The cabinet is in steel construction coated in a corrosion resistant epoxy powder paint, has three chrome plated shelves and toughened sliding glass doors. Equipped with an illuminated power switch and heating indicator light. Suitable for bench mounting. For use on 220-240 V A.C supplies. Size: 250 Litre, Overall dimensions. - 660 x 400 x 1000mm.approx.
  • Thin Layer Chromatography rocess in which compounds are separated on a thin layer of adsorbent material, typically a coating of silica gel on a glass plate or plastic sheet. Kit consist of a movable applicator with built-in thickness arrangement between 0 to 2 mm., with electroplated brass spreader (applicator); Perspex base of size 114 x 23 cm. to support glass plates; Anodized aluminium plate rack for ten plates of size 20 x 20 cm. or 20 x 10 cm. Developing Tank with lid, perspex spotting template, T.L.C. Plates-set of five 20 x 20 cm. and two 20 x 5 cm. or set of ten 20 x10 cm. and two 20 x 5 cm.; Glass sprayer with rubber bellow cap 100 ml., Micro pipette, Scriber for marking lines with stainless steel tip. Supplied complete with instruction manual. Accessories for T.L.C. apparatus : 1. T.L.C. master sheet for direct reading of RF values. 2. Perspex spotting template. 3. Anodized aluminium plate rack to take ten plates. 4. Aluminium anodized plate rack in color gold, blue or red. 5. Stainless steel plate rack to take two plates 20 x 20 cm. vertically for developing. 6. Stainless steel plate rack to take five plates of 20 x 20 cm. for drying or developing. Each rack with two lifting handles one for carrying the plates horizontally for drying and the other for vertically when the rack is used in the developing tank. 7. Glass plates all sides ground for T.L.C. Size 20 x 20 cm., 20 x 10 cm., 20 x 5 cm. 8. Chromatography Tank with stainless steel cover, for plates of size 20 x 5 cm, 20 x 10 cm, 20 x 20 cm. 9. Glass Sprayer with rubber bellow.

Used to store T.L.C. plates. Thick aluminum sheet painted body with
stout glass door sealed with rubber gasket with a tray for silica gel
desiccant and perforated sheet.
Overall Dimentions: I.D. Width x Depth x Ht. 500 x 300 x 350 mm

SKU: PM-227 DESICCATOR CABINET Category: Chemistry - General & Chemical Laboratory Apparatus
  • Economical, Easy to clean powder with powder coated body Accurate, Insulated , Maximum temperature 50°C above ambient, Thermostat control for set temperature Toughened glass doors Used for drying of glassware, or chromatograms and keeping agar based media molten. The cabinet is in steel construction coated in a corrosion resistant epoxy powder paint, has three chrome plated shelves and toughened sliding glass doors. Equipped with an illuminated power switch and heating indicator light. Suitable for bench mounting. For use on 220-240 V A.C supplies. Size: 250 Litre, Overall dimensions. - 660 x 400 x 1000mm.approx.
  • Thin Layer Chromatography rocess in which compounds are separated on a thin layer of adsorbent material, typically a coating of silica gel on a glass plate or plastic sheet. Kit consist of a movable applicator with built-in thickness arrangement between 0 to 2 mm., with electroplated brass spreader (applicator); Perspex base of size 114 x 23 cm. to support glass plates; Anodized aluminium plate rack for ten plates of size 20 x 20 cm. or 20 x 10 cm. Developing Tank with lid, perspex spotting template, T.L.C. Plates-set of five 20 x 20 cm. and two 20 x 5 cm. or set of ten 20 x10 cm. and two 20 x 5 cm.; Glass sprayer with rubber bellow cap 100 ml., Micro pipette, Scriber for marking lines with stainless steel tip. Supplied complete with instruction manual. Accessories for T.L.C. apparatus : 1. T.L.C. master sheet for direct reading of RF values. 2. Perspex spotting template. 3. Anodized aluminium plate rack to take ten plates. 4. Aluminium anodized plate rack in color gold, blue or red. 5. Stainless steel plate rack to take two plates 20 x 20 cm. vertically for developing. 6. Stainless steel plate rack to take five plates of 20 x 20 cm. for drying or developing. Each rack with two lifting handles one for carrying the plates horizontally for drying and the other for vertically when the rack is used in the developing tank. 7. Glass plates all sides ground for T.L.C. Size 20 x 20 cm., 20 x 10 cm., 20 x 5 cm. 8. Chromatography Tank with stainless steel cover, for plates of size 20 x 5 cm, 20 x 10 cm, 20 x 20 cm. 9. Glass Sprayer with rubber bellow.
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Placeholder BURETTES WITH DOUBLE OBLIQUE BORE GLASS  STOPCOCK 3 WAY
  • CUBE MOULD CUBE MOULD
  • Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW. PM-39 AUTOCLAVE
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-227 DESICCATOR CABINET” Cancel reply

Related products

Work screen provides the employees with work environment can be calm, efficient and support creativity. Made of front wooden board 19 mm. thick with white Sunmica pasted, back with 12 mm. thick wooden board pasted with black sunmica, wooden legs, can be easily assembled, mass 21 kg. Work Screen Dimentions are 120 cm x 60 cm x 61 cm height
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-04 WORK SCREEN

With swivel nozzle, screwed lower end, swan neck same as above but with two angled taps set at 45 , riffled nozzles.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-10 WATER TAP, SWAN NECK

Transparent plastic, hypotenuse 135 mm., sides graduated 0-4.5 inches x 0.1 inch and 0-57 mm. x 1 mm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

SET SQUARE 60o

WATER TAP, SWAN NECK
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-11 WATER TAP, SWAN NECK

Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-39 AUTOCLAVE

Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-381 FLASK, ROUND BOTTOM, WIDE NECK

Specification: • Upholstered seat • Steel framework • Revolving top • Height adjustable using pneumatic gas spring
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-02 LABORATORY STOOL

For sealing bottles, tubes, leaks or as a cover to reduce heat losses. Thickness 0.015 mm
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-31 ALUMINIUM FOIL

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

001027

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha