PM-358 DCP FIRE EXTINGUISHER

For a class B & C fire. It takes less than 10 seconds to activate a DCP
fire extinguisher by a simple three step activation process. With
easy pull to unlock the seal with the light pressure. By pulling the
lever down with a simple palm action and release depresses the
plunger there by activating the cartridge. Direct the hose at the
base of fire and gently pressing the lever a second time releases the
powder directly into the fire. User can direct it in different
directions and fight multiple fire points without wasting precious
extinguishing agent. A used/unused indicator shows if the
extinguisher is usable or not. With sticker and clear graphic
symbols Deep drawn body with a single weld line reducing the
potential area of weakness. Cylinder is lead tin-plated from both
inside and outside and then coated with antitrust expoxy paint for
through protection against corrosion. Each cylinder is pressure
2 2 tested at 35 Kg/cm for safety. Cartridge tested upto 250 Kg/cm and
lead-tin plated both from inside outside and then powder coated
on the outside. Each cartridge with accurate CO2 filling