Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-359 FIRE EXTINGUISHER FOR CLASS A FIRE

  • Cobalt blue glass for the detection of certain metals in analysis. Size: 50 x 50 mm
  • For a class B & C fire. It takes less than 10 seconds to activate a DCP fire extinguisher by a simple three step activation process. With easy pull to unlock the seal with the light pressure. By pulling the lever down with a simple palm action and release depresses the plunger there by activating the cartridge. Direct the hose at the base of fire and gently pressing the lever a second time releases the powder directly into the fire. User can direct it in different directions and fight multiple fire points without wasting precious extinguishing agent. A used/unused indicator shows if the extinguisher is usable or not. With sticker and clear graphic symbols Deep drawn body with a single weld line reducing the potential area of weakness. Cylinder is lead tin-plated from both inside and outside and then coated with antitrust expoxy paint for through protection against corrosion. Each cylinder is pressure 2 2 tested at 35 Kg/cm for safety. Cartridge tested upto 250 Kg/cm and lead-tin plated both from inside outside and then powder coated on the outside. Each cartridge with accurate CO2 filling  Technical Specification For 5kg. For 10kg. Diameter of container 150 mm. 175 mm. Height including fitting 465 mm. 600 mm. Discharge Time 14 Sec. 22 Sec. Gross Weight 10.4 kg. 17.9 kg

FIRE EXTINGUISHER FOR CLASS A FIRE
Capacity 9 liter water CO .

Technical Specification
Diameter of Container 175 mm.
Height including fitting 655 mm.
Discharge Weight 80 Sec.
Gross Weight 15.4 kg.
SKU: PM-359 FIRE EXTINGUISHER FOR CLASS A FIRE Category: Chemistry - General & Chemical Laboratory Apparatus
  • Cobalt blue glass for the detection of certain metals in analysis. Size: 50 x 50 mm
  • For a class B & C fire. It takes less than 10 seconds to activate a DCP fire extinguisher by a simple three step activation process. With easy pull to unlock the seal with the light pressure. By pulling the lever down with a simple palm action and release depresses the plunger there by activating the cartridge. Direct the hose at the base of fire and gently pressing the lever a second time releases the powder directly into the fire. User can direct it in different directions and fight multiple fire points without wasting precious extinguishing agent. A used/unused indicator shows if the extinguisher is usable or not. With sticker and clear graphic symbols Deep drawn body with a single weld line reducing the potential area of weakness. Cylinder is lead tin-plated from both inside and outside and then coated with antitrust expoxy paint for through protection against corrosion. Each cylinder is pressure 2 2 tested at 35 Kg/cm for safety. Cartridge tested upto 250 Kg/cm and lead-tin plated both from inside outside and then powder coated on the outside. Each cartridge with accurate CO2 filling  Technical Specification For 5kg. For 10kg. Diameter of container 150 mm. 175 mm. Height including fitting 465 mm. 600 mm. Discharge Time 14 Sec. 22 Sec. Gross Weight 10.4 kg. 17.9 kg
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • ABSORPTION (DRYING) TOWER PM-27 ABSORPTION (DRYING) TOWER
  • The pole climbing apparatus is a laboratory instrument used in pharmacology to study the effects of drugs on cognitive function and antipsychotic activity. It is also used to study how animals learn and retain conditioned responses Used in Pharma Industries, Pharmacy Colleges, Pharmacology Departments. Apparatus consist of Outer chamber made of thick plywood sheet with an observation window Inner animal chamber is made of clear acrylic sheet bottom of which is provided with chrome plated brass bars. A shock for controlled duration of 200V AC 50Hz single phase -0.2ma is built-in and is controlled by built-in 11 position solid state timer upto 30 seconds.\   Output for connection to kymograph or recorder has been brought out as terminal.   An animal dropping removal tray has been provided for keeping the equipment clean.   HOW IT WORKS Animals are trained to jump on a pole to avoid an electrical shock The apparatus can provide audio or light stimuli The apparatus can provide an electrical shock of a controlled duration The apparatus can record the animal's response What it's used for Antipsychotic drugs: The apparatus is used to determine how well antipsychotic drugs work  Cognitive function: The apparatus is used to study how animals respond to conditioned stimuli during learning  Stable baseline behavior: The apparatus is used to induce a stable baseline behavior in animals  NPH-18 POLE CLIMBING APPARATUS
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-359 FIRE EXTINGUISHER FOR CLASS A FIRE” Cancel reply

Related products

PM- 15 GAS TAP DOUBLE A gas tap, or gas valve, is a device that controls the flow of gas through a pipe from its supply source. They are essential devices in a range of chemistry and physics exercises, from the basic level all the way up to commercial, industrial, or research laboratories. PVG’s Gas taps are of Best  quality , Brassin Chrome plated or black powder coated for laboratory use Long life, Provides precise control over gas flow for experiments and processes Can be  used with a variety of gases commonly used in laboratory applications. Heavy construction ,Leak proof, tested, accurate, meets the safety standards required for laboratory equipment Ideal for educational institutionsie in Chemistry Labs., Research facilities, and industrial laboratories where control of Gas is required. Lever handle easy to install with brass adapter. Mounted at 90 Degree. PVG INTERNATIONAL’s Gas taps are  Direct, Single, Double, Triple Four way Pillar Mounted .
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-15 GAS TAP DOUBLE, PILLAR MOUNTED

Nontoxic, nonabsorbent, nonflammable, polytetrafloroethylene tape, provides an effective seal on all type of materials such as stainless steel, copper, brass, aluminium, plastic, ceramic etc.; resistant to medium including oils, solvents, water, steam, gases, strong alkalies, acids etc.; can be used over a wide temperature range of -150 C to +250 C; chemically inert so protects fluid against contamination. Excellent electrical insulation property of the tape prevents electric conduction and saves pipes from electric erosion. Requires no drying thus making joints ready for immediate use. Having unlimited shelf life so can be stored easily and indefinitely without loss of properties. Length 10 meter Cat. No. Width x length mm. 30.01 12 30.02 19 30.03 25
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-30 ADHESIVE P.T.F.E. (TEFLON) TAPE

Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-381 FLASK, ROUND BOTTOM, WIDE NECK

To hold two burettes, powder coated metal base of size 250x150 mm. thickness 3 mm. with plastic feet, central hole to screw a nickle plated rod of diameter 12 mm. height 60cm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-642 BURETTE STAND DOUBLE WOODEN

Four legs, painted mild steel, seat diameter 30 cm , height adjustable from 45 to 65 cm. Stainless steel or nickel plated top and legs with rubber covered tips.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-03 REVOLVING STOOL – STEEL

For sealing bottles, tubes, leaks or as a cover to reduce heat losses. Thickness 0.015 mm
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-31 ALUMINIUM FOIL

Seamless stainles steel or double walled s.s with safety valve and reinforced bakelite heat resistant handles, safe to operate, with pressure gauze and safety valve level, with a rubber ring gasket fits in the lid so as to make the closure absolutely leak proof. Size, seamless Cat. No. Dia x Depth mm. 40.01 300x300 40.02 350x450 Vertical Double Wall Cat. No. Dia x Depth mm. 40.01 250x400 40.02 300x500 40.03 350x550 40.04 400x600 40.05 450x600 40.06 550x750
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-40 AUTOCLAVE STAINLESS STEEL

Transparent plastic, hypotenuse 135 mm., sides graduated 0-4.5 inches x 0.1 inch and 0-57 mm. x 1 mm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

SET SQUARE 60o

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

012956

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha