Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Thick sheet steel/Brass with wooden handle to accept tubes up to 33 mm. diameter
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-761 TEST TUBE HOLDER, STEEL/ BRASS

  • Spring steel wire holder, nickel plated to take tubes up to 70 mm. diameter. Ring in the side arms for easy pressing and holding Cat. No. Length x birth x thickness 762.01 100 x 100 x 12 762.02 150 x 150 x 15
  • TEST TUBE HOLDER, WOODEN

Thick sheet steel/Brass with wooden handle to accept tubes up
to 33 mm. diameter

SKU: PM-761 TEST TUBE HOLDER, STEEL/ BRASS Category: Chemistry - General & Chemical Laboratory Apparatus
  • Spring steel wire holder, nickel plated to take tubes up to 70 mm. diameter. Ring in the side arms for easy pressing and holding Cat. No. Length x birth x thickness 762.01 100 x 100 x 12 762.02 150 x 150 x 15
  • TEST TUBE HOLDER, WOODEN
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Thick sheet steel/Brass with wooden handle to accept tubes up to 33 mm. diameter PM-761 TEST TUBE HOLDER, STEEL/ BRASS
  • Low Noise. Fitted with vacuum legs for better griping on table. Vibration free. C.F.C. Free refrigeration. Bench Top, all purpose. Heavy duty C.R.C. construction nished with powder coating. Stainless Steel centrifugal bowl for extra protection and easy cleaning. Fitted with well balanced universal motor with carbon brushes. 2 lines, 20 characters. LCD Display for set time, run time, set and run r.p.m., r.c.f. Digital Timer 0-59 minutes. Digital Speed Indicator and R.C.F. Indicator. Programmable Speed Regulator from 2000 to 16000 r.p.m. in Variation of 100 r.p.m. Safety lid lock. P.I.D. Electronic digital temperature controller cum indicator is tted to control the centrifuge temperature from room temperature up to -20°C means shuts off the cooling compressor within accuracy of ± 1°C in standby mode. Means only centrifuge bowl is cooling. Temperature Accuracy when motor is also running is ± 2°C Technical Specifications Max. Speed 16000 r.p.m. Max. RCF 23000 x g. Timer 0-59 min. Motor Universal Motor (with carbon brushes). Temp. Range from room temperature- to Minus 8°C. Power  AC 220V 50 Hz 20A. Mass 60 kg. approx. Dimensions L-675 x W-525 x Ht.375 mm. approx. PM-225 REFRIGERATED UNIVERSAL CENTRIFUGE MACHINE 16000 R.P.M
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-761 TEST TUBE HOLDER, STEEL/ BRASS” Cancel reply

Related products

Borosilicate glass, interchangeable stopper, with stopcock, plain stem. Cat. No. Capacity ml. 417.01 50 417.02 100 417.03 150 417.04 250 417.05 500 417.06 1000
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-417 FUNNELS DROPPING, CYLINDRICAL

Nontoxic, nonabsorbent, nonflammable, polytetrafloroethylene tape, provides an effective seal on all type of materials such as stainless steel, copper, brass, aluminium, plastic, ceramic etc.; resistant to medium including oils, solvents, water, steam, gases, strong alkalies, acids etc.; can be used over a wide temperature range of -150 C to +250 C; chemically inert so protects fluid against contamination. Excellent electrical insulation property of the tape prevents electric conduction and saves pipes from electric erosion. Requires no drying thus making joints ready for immediate use. Having unlimited shelf life so can be stored easily and indefinitely without loss of properties. Length 10 meter Cat. No. Width x length mm. 30.01 12 30.02 19 30.03 25
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-30 ADHESIVE P.T.F.E. (TEFLON) TAPE

Ceramic of high quality fireclay, with hard white glaze, with an outlet in the center of base at one end. Cat. No. Size mm. Make Material  Type 5.01 450x300x175 Ceramic Single 5.02 600x450x250 Ceramic Single 5.03 450x400x200 Stainless Steel Single Bowl 5.04 600x450x225 Stainless Steel Single Bowl 5.05 925x450x200 Stainless Steel Double Bowl 5.06 1125x500x225 Stainless Steel Double Bowl
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-05 LABORATORY SINKS

Screwed lower end, with one angle tap.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-09 WATER TAP SWAN NECK

High density plastic, with large bore polythene tap, screw on plastic cap, integral moulded handle. Cat. No. Capacity liter 38.01 2 38.02 5 38.03 10 38.04 20 38.05 35 38.06 60
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-38 ASPIRATOR, RECTANGULAR, PLASTIC

Flat rectangular form, metal body, dual scale, with hook and ring. Cat. No. Capacity kg. Subdivision  42.01 3 0.05 42.02 5 0.25 42.03 10 0.25 42.04 12.5 0.25 42.05 20 0.4 42.06 25 0.5
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-42 BALANCE, SPRING, METRIC / IMPERIAL

PM- 15 GAS TAP DOUBLE A gas tap, or gas valve, is a device that controls the flow of gas through a pipe from its supply source. They are essential devices in a range of chemistry and physics exercises, from the basic level all the way up to commercial, industrial, or research laboratories. PVG’s Gas taps are of Best  quality , Brassin Chrome plated or black powder coated for laboratory use Long life, Provides precise control over gas flow for experiments and processes Can be  used with a variety of gases commonly used in laboratory applications. Heavy construction ,Leak proof, tested, accurate, meets the safety standards required for laboratory equipment Ideal for educational institutionsie in Chemistry Labs., Research facilities, and industrial laboratories where control of Gas is required. Lever handle easy to install with brass adapter. Mounted at 90 Degree. PVG INTERNATIONAL’s Gas taps are  Direct, Single, Double, Triple Four way Pillar Mounted .
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-15 GAS TAP DOUBLE, PILLAR MOUNTED

Specification: • Upholstered seat • Steel framework • Revolving top • Height adjustable using pneumatic gas spring
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-02 LABORATORY STOOL

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

078716

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2026 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha