Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-774 MULTIPURPOSE TONGS

  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
  • Mild steel or stainless steel, hold flask firmly, corklined jaws, with finger grip. Length 300 mm

Plated mild steel or stainless steel, with overlapping finger claws for
holding test tubes, thermometer, glass rods etc. Length 200 mm.

SKU: PM-774 MULTIPURPOSE TONGS Category: Chemistry - General & Chemical Laboratory Apparatus
  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
  • Mild steel or stainless steel, hold flask firmly, corklined jaws, with finger grip. Length 300 mm
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking PM-888 PVG CONDUCTIVITY CELL, DIP TYPE
  • Design and Features The NVG-10 burette is a high-quality, precision instrument made from borosilicate glass, which is highly resistant to thermal shock and chemical corrosion. The burette has a long cylindrical body, marked with graduations along its length to allow precise readings of the liquid volume being dispensed. The graduations are often printed with high-contrast ink, which makes reading measurements easy and minimizes the risk of parallax errors. The distinguishing feature of this burette is its straight bore stopcock made from PTFE (Polytetrafluoroethylene), commonly known by the brand name Teflon. PTFE is well known for its excellent chemical resistance, non-stick properties, and high tolerance to temperature variations. This makes the NVG-10 burette ideal for use with a wide range of reagents, including acidic, basic, and organic solutions, as PTFE is virtually inert to most chemicals found in laboratory settings. The straight bore design of the stopcock allows the liquid to flow smoothly through the valve, reducing the potential for blockages or irregularities in dispensing. The stopcock can be easily rotated to control the flow rate of the liquid being dispensed, allowing for fine control during titrations. The PTFE stopcock is also leak-proof, providing confidence in accuracy and ensuring no loss of solution during use. Uses and Applications The NVG-10 burette with a PTFE key stopcock is primarily used for volumetric analysis, particularly in titration experiments. Titration is a common analytical procedure used to determine the concentration of a solution by reacting it with a solution of known concentration, called a titrant. The burette’s accuracy and easy control make it essential for various laboratory applications, including: Acid-Base Titrations: Acid-base titrations are among the most common uses of the NVG-10 burette. In these experiments, the burette is used to accurately dispense an acid or base solution into a flask containing the analyte and an indicator. The precise control offered by the PTFE stopcock allows the titrant to be added dropwise as the endpoint is approached, ensuring the reaction is stopped at the exact point where neutralization occurs. Redox Titrations: Redox titrations involve the transfer of electrons between reactants and are used to determine the concentration of oxidizing or reducing agents in a solution. The NVG-10 burette is particularly suitable for dispensing the titrant in redox reactions, where precise volume control is necessary to accurately determine the equivalence point. Complexometric Titrations: In complexometric titrations, a chelating agent, such as EDTA, is used to form a complex with metal ions. The NVG-10 burette is used to dispense the chelating agent while monitoring the formation of the complex, typically with the use of an appropriate indicator. The accuracy of the NVG-10 ensures that even trace concentrations of metal ions can be accurately determined. Quality Control in Industrial and Research Settings: Industries such as pharmaceuticals, food and beverage production, and water treatment often rely on titration for quality control and product analysis. The NVG-10 burette is ideal for these settings, providing the precision needed to ensure that products meet stringent quality and safety standards. Advantages of PTFE (Teflon) Key Stopcock The PTFE key stopcock is a critical feature of the NVG-10 burette that provides several advantages: Chemical Resistance: PTFE is highly resistant to a wide range of chemicals, including strong acids, alkalis, and organic solvents. This ensures that the stopcock remains unaffected by the chemical reagents being dispensed, reducing the risk of degradation or contamination. This chemical resistance makes the NVG-10 burette versatile and suitable for use with a wide range of reagents. Smooth and Reliable Flow Control: The straight bore design of the PTFE stopcock ensures a smooth, unrestricted flow of liquid. The non-stick properties of PTFE minimize friction, allowing for easy and precise adjustments to the flow rate, which is essential during titration. This smooth control is particularly useful when approaching the endpoint, where dropwise addition of the titrant is required. Leak-Proof Operation: The PTFE stopcock is designed to provide a secure, leak-proof seal. This prevents loss of the titrant and ensures the accuracy of the titration process. The tight seal also minimizes the risk of contamination by preventing external substances from entering the burette. Ease of Cleaning and Maintenance: PTFE is easy to clean due to its non-stick properties. Residues from previous experiments do not adhere to the PTFE surface, making it easy to rinse and clean the stopcock between uses. This feature helps to maintain the accuracy and reliability of the burette over time. Calibration and Accuracy The NVG-10 burette is calibrated to ensure high accuracy, which is crucial for titrations and other volumetric analyses. The graduations are marked clearly, allowing the user to accurately measure the volume of the dispensed liquid. The accuracy of the burette is often expressed as a percentage of the total volume, and the NVG-10 burette typically meets or exceeds the standards required for Class A accuracy. This level of precision is vital in quantitative analyses where even a slight deviation in volume could lead to incorrect results. Handling and Maintenance Proper handling and maintenance of the NVG-10 burette are crucial to ensuring its longevity and accuracy: Cleaning: After each use, the burette should be thoroughly cleaned to prevent any residues from affecting future titrations. The PTFE stopcock can be easily removed and cleaned separately to ensure that no chemicals are left inside the bore. For cleaning, the burette should be rinsed with deionized water, followed by the solvent appropriate to the reagents used. Storage: The burette should be stored in an upright position to prevent the stopcock from becoming damaged or blocked. It is also essential to keep the stopcock open when not in use to avoid unnecessary stress on the sealing surfaces. Calibration Check: Regular calibration checks are recommended to ensure that the burette maintains its accuracy. Calibration should be done periodically or if the burette is suspected to be inaccurate. NVG-10 BURETTES WITH STRAIGHT BORE PTFE (TEFLON) KEY STOPCOCK
  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking PM-181 TEST TUBE BRUSH
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-774 MULTIPURPOSE TONGS” Cancel reply

Related products

WATER TAP, SWAN NECK
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-11 WATER TAP, SWAN NECK

PM- 15 GAS TAP DOUBLE A gas tap, or gas valve, is a device that controls the flow of gas through a pipe from its supply source. They are essential devices in a range of chemistry and physics exercises, from the basic level all the way up to commercial, industrial, or research laboratories. PVG’s Gas taps are of Best  quality , Brassin Chrome plated or black powder coated for laboratory use Long life, Provides precise control over gas flow for experiments and processes Can be  used with a variety of gases commonly used in laboratory applications. Heavy construction ,Leak proof, tested, accurate, meets the safety standards required for laboratory equipment Ideal for educational institutionsie in Chemistry Labs., Research facilities, and industrial laboratories where control of Gas is required. Lever handle easy to install with brass adapter. Mounted at 90 Degree. PVG INTERNATIONAL’s Gas taps are  Direct, Single, Double, Triple Four way Pillar Mounted .
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-15 GAS TAP DOUBLE, PILLAR MOUNTED

Four legs, painted mild steel, seat diameter 30 cm , height adjustable from 45 to 65 cm. Stainless steel or nickel plated top and legs with rubber covered tips.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-03 REVOLVING STOOL – STEEL

Transparent plastic, hypotenuse 135 mm., sides graduated 0-3.5 inches x 0.1 inch and 0-77 mm. x 1 mm.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

SET SQUARE 45o

With swivel nozzle, screwed lower end, swan neck same as above but with two angled taps set at 45 , riffled nozzles.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-10 WATER TAP, SWAN NECK

Highly Accurate, Reliable, Portable Instruments for Field and Laboratory Use Salient Features Measures pH, Conductivity, TDS, DO, Salinty, mV & Temperature Turbidity measurement in Deluxe Model Mains cum Battery Operated Available in ABS Plastic Briefcase Technical Specification Model 260 290 Product Digital water & Soil Analysis Kit Deluxe Model Display PH 3 ½ Digit LCD 3 ½ Digit LCD Range 0 to 14 pH 0 to 14 pH Resolution 0.01 pH 0.01 pH Accuracy 0.01± 1Digit 0.01±1 Digit Temp. Comp. 0 to 1000C(/Mannual) 0to1000C(/Mannual) Conductivity (EC) Range 0-200µS 0.20mS 0-2,0-200-200mS Resolution 0.1µS 0.01mS(10µS) Range Selection Mannual ----- Accuracy ±0.5% FS ±1 Digit ±0.5% FS ±1 Digit Cell Constant Adjustable (0.4 to 1.5) Pre-Adjustable Temp. Coefficient. 2% 2% Temp. Comp. Adjustable from table Adjustable from table Ref. Temp. 0-250C 0-250C Temperature Range 0-1000C 0-1000C Resolution 10C 10C Accuracy +/-10C+Digit +/-10C+Digit Sensor Semi Conductor Type Semi Conductor Type   TDS Range 0-200 ppm 0-20 ppt 0-2,0-200-200ppt Range Selection Mannual ------ Resolution 0.01 ppm 0.01ppt Accuracy ±0.5% FS ± 1Digit ±0.5% FS ± 1Digit Temp. Comp. 0.4 to 1.5 on display Pre-Adjustable DO Range 0-20ppm 0-20ppm Resolution 0.1 ppm 0.1 ppt Accuracy 0.5 ppm ± 1 Digit 0.5 ppm ± 1 Digit Temp. Comp. Mannua(50C to 550C) Mannua(50C to 550C) DO Sensor Gold/Silver Amperometric Probe Gold/Silver Amperometric MV (ORP) Range 0 to ± 1999 mV Resolution 1mV Accuracy 1 mV±1 digit Tubidity Range 0-1000 NTU Resolution ----- 1NTU Accuracy +/-3% FS ± 1Digit Sample System 30 mm  Glass Tube Salinity Range 0-50 ppt 0-50 ppt Resolution 0.1 ppt 0.1 ppt Accuracy ±0.5% FS ± 1 Digit 30 mm  Glass Tube Colorimeter Semi Conductor Type 30 mm  Glass Tube Power Supply 1.5V x 6Dry Cells Inbuilt Chargeable Battery Colorimeter or 230V±10¬, 50Hz or 230V ± 10¬, 50Hz
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-895 WATER & SOIL ANALYSIS KIT DIGITAL

Transparent body, with zero adjuster, top suspension ring and loading hook; overall length when closed 285 mm. Range - Cat. No. Capacity gm. Subdivision gm. 45.01 100 1 45.02 250 2.5 45.03 500 5 45.04 1000 10
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-45 BALANCE SPRING, PLASTIC BARREL

Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-39 AUTOCLAVE

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

001079

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha