Skip to content
PVG INTERNATIONALPVG INTERNATIONAL
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com
  • Cart

    No products in the cart.

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
Add to wishlist
Moulded red flexible rubber bulb, with three point valve, operated by fingers and thumb. Used for filling the pipettes or setting the meniscus. Bulb diameter 40 mm. and length of stem 35 mm.
Home / Chemistry - General & Chemical Laboratory Apparatus

PM-878 PVG PIPETTE FILLER

  • A fast release pipetting device for precise pipetting & zip quick emptying. Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. Resists to acids & alkalies and can be easily disassembled for through cleaning. Capacity............ 2ml . 10ml. 25 ml.
  • This unit has a large capacity of washing device. For serological, bacteriological clinical laboratories. Operates on a siphonic principal to send a continuous flow of water over and through the pipettes. At a normal pressure the water is completely changed in cycles of about one minute. Even at reduced pressure this washer operates efficiently. Consists of a stainless steel washing cylinder of size 550 height x 150 mm. diameter mounted on a base of 250 mm. diameter and a removable pipette holder of 138 mm. diameter. Stainless steel holder with a heavy mesh bottom. The cylinder with a inlet of 12 mm. with a removable nose nipple for attaching to permanent drain if desired. This unit will accommodate pipettes up to 375 mm. in length.

Moulded red flexible rubber bulb, with three point valve, operated
by fingers and thumb. Used for filling the pipettes or setting the
meniscus. Bulb diameter 40 mm. and length of stem 35 mm.

SKU: PM-878 PIPETTE FILLER Category: Chemistry - General & Chemical Laboratory Apparatus
  • A fast release pipetting device for precise pipetting & zip quick emptying. Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. Resists to acids & alkalies and can be easily disassembled for through cleaning. Capacity............ 2ml . 10ml. 25 ml.
  • This unit has a large capacity of washing device. For serological, bacteriological clinical laboratories. Operates on a siphonic principal to send a continuous flow of water over and through the pipettes. At a normal pressure the water is completely changed in cycles of about one minute. Even at reduced pressure this washer operates efficiently. Consists of a stainless steel washing cylinder of size 550 height x 150 mm. diameter mounted on a base of 250 mm. diameter and a removable pipette holder of 138 mm. diameter. Stainless steel holder with a heavy mesh bottom. The cylinder with a inlet of 12 mm. with a removable nose nipple for attaching to permanent drain if desired. This unit will accommodate pipettes up to 375 mm. in length.
Categories
  • Chemistry - General & Chemical Laboratory Apparatus
  • Laboratory Glassware
    • Distillation Assembly & Rotary Evaporators
    • Laboratory Glassware section -1
    • Interchangeable Laboratory Glassware
    • Organic Chemistry Set
    • Clevenger, Dean & Stark
    • Chromatography Columns & Gas Analysis
    • Clinical Laboratoy Glassware
    • Dairy & Milk Testing
    • Hydrometers
    • Thermometers
    • Quartz Glassware
    • Sintered Glasswae
    • Reaction Vesssel
    • Volumetric Glasswares
  • Anatomical Models
  • Biological Apparatus & Material
  • Microscopes & Accessories
  • Physics & Electronic Laboratory Apparatus
  • Pharmacy Apparatus
  • Earth Sciences
  • Plasticware
  • Uncategories
  • Agriculture Equipment
  • Surgical Instruments & Hospital Equipment
  • Chemicals
  • Material Testing
Recently Viewed
  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking PM-670 RETORT STAND, POLYPROPYLENE
  • Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking PM-829 THREAD
  • PM-812 SCREWDRIVER PM-812 SCREWDRIVER
  • Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PM-878 PVG PIPETTE FILLER” Cancel reply

Related products

This chair ensures high comfort levels during work. Features a high mobility hand grip slot and also a sturdy lumbar support, with adjustable armrest for added comfort during work. Very easy to assemble, No tools required in order to install the chair. A safe and reliable chair, one that can make a lot of research hours seem like minutes.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-01 LABORATORY CHAIR

Comprises a borosilicate glass U tube with 225 mm. height, with each limb graduated 0-120 x 1 mm. Bend fitted with a filling tube and stopcock. Two platinum electrodes 14 mm. diameter can be adjusted at any position by locking
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-381 FLASK, ROUND BOTTOM, WIDE NECK

Screwed lower end, with one angle tap.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-09 WATER TAP SWAN NECK

GAS TAP, DOUBLE, PILLAR MOUNTED
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-16 GAS TAP, DOUBLE, PILLAR MOUNTED

Seamless stainles steel or double walled s.s with safety valve and reinforced bakelite heat resistant handles, safe to operate, with pressure gauze and safety valve level, with a rubber ring gasket fits in the lid so as to make the closure absolutely leak proof. Size, seamless Cat. No. Dia x Depth mm. 40.01 300x300 40.02 350x450 Vertical Double Wall Cat. No. Dia x Depth mm. 40.01 250x400 40.02 300x500 40.03 350x550 40.04 400x600 40.05 450x600 40.06 550x750
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-40 AUTOCLAVE STAINLESS STEEL

Ceramic of high quality fireclay, with hard white glaze, with an outlet in the center of base at one end. Cat. No. Size mm. Make Material  Type 5.01 450x300x175 Ceramic Single 5.02 600x450x250 Ceramic Single 5.03 450x400x200 Stainless Steel Single Bowl 5.04 600x450x225 Stainless Steel Single Bowl 5.05 925x450x200 Stainless Steel Double Bowl 5.06 1125x500x225 Stainless Steel Double Bowl
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-05 LABORATORY SINKS

With swivel nozzle, screwed lower end, swan neck same as above but with two angled taps set at 45 , riffled nozzles.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-10 WATER TAP, SWAN NECK

Portable electrically heated, with working pressure adjustable from 5 2 lbs to 15 lbs/in , diecast body of high tensile strength aluminium, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its 2 chucknut, pressure weight valve set at 17/18 lbs/in work automatically if the other safety valve fails to release the excess 2 steam, with pressure gauze 0-30 lbs/in and closed by six wing nuts having long threaded screw with bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a bakelite grip, body with a steam release tap system tube having a bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process, fitted with a element 2 kW for heating. Complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm. 300 x 300. Spare parts - 1. Gasket for Autoclave 2. Steam release valve with knob. 3. Safety valve. 4. Pressure gauze. 5. Lid handle. 6. Element 2 kW.
Add to wishlist
Quick View

Chemistry - General & Chemical Laboratory Apparatus

PM-39 AUTOCLAVE

  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog

Address Details

PVG International
# 6 - C, New Ram Nagar, Ambala Cantt - 133 001, Haryana, India.
# P.O. Box-113

Our Visitor

001079

Contact Details

  • info@pvginternationals.com
  • info@narayanienterprises.com
  • +91-9466446612
  • +91-9728497962
  • Phone: +91-171-2651006, 2653272
  • Fax: +91-171-2653259
Copyright 2025 © PVG INTERNATIONAL
  • Home
  • About Us
  • Certifications
  • Products
  • Contact
  • Blog
  • Login
    • Mobile: +91-9466446612 +91-9728497962
    • E-Mail: info@pvginternationals.com info@narayanienterprises.com

Login

captcha

Lost your password?

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

captcha