Add to wishlist
SEED SAMPLING PROBE

NAP-24 SEED SAMPLING PROBE

Made of Brass, nickel plated Brass with Aluminium Handle
Double Tube with 3-8 openings for various sample testing.
Length : 50 cm, 75cm, 90cm, 120cm, 150 cm.

SKU: NAP-24 SEED SAMPLING PROBE Category:

Reviews

There are no reviews yet.

Be the first to review “NAP-24 SEED SAMPLING PROBE”

Related products

Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel frameworkofstainlesssteeltubularormildsteelwiththick SalientFeatures Efficiency :99.97% (or above) down to 0.3 micron. Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm Discharge :Air volume 90 cfm =10% Noise level :Below 65 db Illumination :Byfluorescenttubeasper sizeofworkingarea Germicidal :By ultra-violet tube (on Request)(Approx 50 microwattspersq. cmontheentireworksurface) Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage. Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional) Support Stand: Stainless steel square pipe stand with levelling device (Optional) Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional) Supplied complete with : H.E.P.A. Filter, pre filter, Centribalanced, Centrifugal Air Succes s ion blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer Standard Dimensions of working area: (I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm. Other sizes can be designed as per customer specification. Note : OptionalAccessories andTest Facilities at extra cost.
Add to wishlist
Quick View

Agriculture Equipment

NAP-20 SUSPENDED LAMINAR AIR FLOW UNIT

Outer wall of mild steel sheet duly painted and inner wall of heavy gauge aluminum or stainless steel sheet filled with high grade glass wool to avoid thermal loss. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions. Unit is supplied with o three adjustable perforated shelves. Temperature range is from 5 o o to 50 c + 1 c is controlled by Dual Setting digital temperature indicator-cum-controller so as to set two different temperatures for day and night. Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination condition are regulated by automatic 0- o 24 hrs. timer when all the tubes are ON temperature from 15 c to o 50 c can be obtained. Humidity varies from Ambient to 95%+ 3% RH is controlled by a controller at temperature ranging from o ambient to 50 c and the same is achieved by means of injecting steam. Arrangements for increasing the humidity is providing and not for decreasing Size, Width x Height X Depth (I) 505 x 830 x 415 mm. ( 6 Cu. Ft.) , (ii) 570 x 875 x 550 mm. ( 10 Cu. Ft.), (iii) 650 x 900 x 550 mm. ( 12 Cu. Ft.), (iv) 700 x 900 x 650 mm. ( 15 Cu. Ft.), (v) 775 x 900 x 775 mm. ( 20 Cu. Ft.), (vi) 825 x 1200 x 825 mm. ( 30 Cu. Ft.), (vii) 900 x1720 x 800 mm. ( 45 Cu. Ft.)
Add to wishlist
Quick View

Agriculture Equipment

NAP-18 PLANT GROWTH CHAMBER

GRAIN/SEED DIVIDER BOERNER TYPE This Boerner Divider  is commonly used in seed laboratories and agricultural research institutions. The Boerner Divider reduces the size of a grain sample while maintaining the equal distribution of the original Sample. This is utilized to obtain representative samples of seeds for testing purposes. It helps in accurately dividing and reducing a bulk seed sample into smaller, manageable portions for further analysis. The basic operation of the Boerner Seed Divider involves pouring the bulk seed sample into the top of the device, which then uses a series of trays, chutes, and oscillating movements to separate and divide the seeds. The result is a set of sub-samples that are more representative of the entire seed lot. Made of Brass with Hopper capacity  1000 gm. No electricity is required to operate this divider. Mechanically operated this divider works on gravity principal  Provided with two collecting pans. Number of pockets are 38, Steel Legs and support.
Add to wishlist
Quick View

Agriculture Equipment

NAP-01 GRAIN/SEED DIVIDER BOERNER TYPE

• Light-weight, Heat treated & anodized, Good finish Provided with full blazed bottom ring, ensured for abrasion resistance and long life. Light in weight and portable, available in different storage. Capacity litre 5, 10, 15, 20, 30, 40 & 50 Stainless steel cans also available. Capacity litre : 2,5,10,20 & 40.
Add to wishlist
Quick View

Agriculture Equipment

NAP-29 ALUMINIUM MILK CAN

NAP-17 ENVIRONMENTAL CHAMBER & HUMIDITY CABINET
Add to wishlist
Quick View

Agriculture Equipment

NAP-17 ENVIRONMENTAL CHAMBER & HUMIDITY CABINET

NAP-08 SEED COUNTER MICRO CONTROLLER
Add to wishlist
Quick View

Agriculture Equipment

NAP-08 SEED COUNTER MICRO CONTROLLER

SEED GERMINATOR (DOUBLE CHAMBER)
Add to wishlist
Quick View

Agriculture Equipment

NAP-15 SEED GERMINATOR (DOUBLE CHAMBER)

SPECIFICATION Measurement range: Moisture content : 8 to 20%. Temperature : –10°C to 55°C. Resolution : 0.1. Accuracy: Moisture : ±1%. Temperature : ±0.8°C. Display: 4 digits, 10mm LCD. Operating Temperature : 0°C to 50°C. Grains : paddy, rice, corn, wheat. Calibration : Automatic. Low Battery : Indicated. Dimension : 178 x 68 x 39mm. Power supply : 4×1.5V AA (UM-3) battery. Weight : About 280g (not including measuring probe and batteries). Accessories : Carrying Case, Operational manual, Measuring Probe.
Add to wishlist
Quick View

Agriculture Equipment

NAP-30 MOISTURE GRAIN METRE