NAP-20 SUSPENDED LAMINAR AIR FLOW UNIT

Two types i.e Ceiling Suspended or steel stand supported with
suspension chains to be suspended/hanged with the ceiling. Can
also be fixed with support stands. Fabricated out of stainless steel
frameworkofstainlesssteeltubularormildsteelwiththick
SalientFeatures
Efficiency :99.97% (or above) down to 0.3 micron.
Blower Unit :Centri-balanced , Centrifugal motorized
blower with 1/3 h.p. 1440 rpm
Discharge :Air volume 90 cfm =10%
Noise level :Below 65 db
Illumination :Byfluorescenttubeasper sizeofworkingarea
Germicidal :By ultra-violet tube (on Request)(Approx 50
microwattspersq. cmontheentireworksurface)
Electrical : Controls are on the front facia of the chamber.
Internal wirings are protected with heat
resident material. Mains are through M.C.B.
for higher protection against shock/damage.
Manometer :Block type acrylic/Plexi-glass inclined Static
Pressure Manometer or Dial type Magnehelic
Differential Pressure Manometer (Optional)
Support Stand: Stainless steel square pipe stand with
levelling device (Optional)
Filter : Standard HEPE filter Manipulated HEPA filter
& hour meter for U.V. Tube & Blower (Optional)
Supplied complete with : H.E.P.A. Filter, pre filter, Centribalanced, Centrifugal Air Succes s ion blower Unit,
Flourescent Tube Light, UV tube, Static Pressure Manometer
Standard Dimensions of working area:
(I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm.
(iv) 1200 x 1200 mm. (v) 1800 x 1200 mm.
Other sizes can be designed as per customer specification.
Note : OptionalAccessories andTest Facilities at extra cost.