Add to wishlist
Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.

NAP-11 SEED GRADING SIEVES

Made out of either brass or G. I. And wire mesh or perforated Mild
Steel sheet, designed to confirm to specification set by .I.S.
Standard sieves has 8” or 12” dia, 2” approx depth. Frames are
skirted to nest together. Suitable for grain/seed grading.

SKU: NAP-11 SEED GRADING SIEVES Category:

Reviews

There are no reviews yet.

Be the first to review “NAP-11 SEED GRADING SIEVES”

Related products

Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel frameworkofstainlesssteeltubularormildsteelwiththick SalientFeatures Efficiency :99.97% (or above) down to 0.3 micron. Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm Discharge :Air volume 90 cfm =10% Noise level :Below 65 db Illumination :Byfluorescenttubeasper sizeofworkingarea Germicidal :By ultra-violet tube (on Request)(Approx 50 microwattspersq. cmontheentireworksurface) Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage. Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional) Support Stand: Stainless steel square pipe stand with levelling device (Optional) Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional) Supplied complete with : H.E.P.A. Filter, pre filter, Centribalanced, Centrifugal Air Succes s ion blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer Standard Dimensions of working area: (I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm. Other sizes can be designed as per customer specification. Note : OptionalAccessories andTest Facilities at extra cost.
Add to wishlist
Quick View

Agriculture Equipment

NAP-20 SUSPENDED LAMINAR AIR FLOW UNIT

RICE POLISHER
Add to wishlist
Quick View

Agriculture Equipment

NAP-05 RICE POLISHER

NAP-02 PRECISION DIVIDER (GAMET TYPE)
Add to wishlist
Quick View

Agriculture Equipment

NAP-02 PRECISION DIVIDER (GAMET TYPE)

Easy to use, economical, accurate, non-electrical with two pans and a hooper, scoop. Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width 1.2cm which discharge the material alliteratively in opposite directions into speculate panes. The chutes are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with reinforcement of the portions to maintain accuracy of the slot dimensions. Complete with a cleaning brush. Models :- Models also available in stainless steel.
Add to wishlist
Quick View

Agriculture Equipment

NAP-03 RIFFLE DIVIDER

• Safe, Easy to use, Provide a controlled Environment • Robust construction, with Accurate controls, • With Long Trouble free Life Double walled construction, Outer chamber of thick mild steel with rust proof powder coated paint; Inner Chamber of Stainless steel ; Gap of 75 mm between outer and inner is filled with glass wool to prevent thermal loss; Provided with double door, so as there is no contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors inner made of thick transparent full view glass and outer door is double walled mild steel. Whole unit is mounted on castor wheels for easy movement. With a self cooled air circulation fan to maintain uniform temperature and Humidity through out the chamber; Humidity is controlled with Humidistat. Inside water tank of stainless steel. All the electronic controls given on the front panel. With thermal fuse. Technical Specification Temperature Range : From ambient to 60°C ,controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller. Humidity range: Up to 95% and controlled by Dual Display Microprocessor PID Digital Humidity Indicator cum Controller. Shelves : Two or Three Power : 220 V 50 Hz A.C Mains Size of the Inner Chamber : Any other size can be made as per the customers requiremen.
Add to wishlist
Quick View

Agriculture Equipment

NAP-16 HUMIAMBERDITY CHAMBER

SEED SAMPLING PROBE
Add to wishlist
Quick View

Agriculture Equipment

NAP-24 SEED SAMPLING PROBE

NAP-08 SEED COUNTER MICRO CONTROLLER
Add to wishlist
Quick View

Agriculture Equipment

NAP-08 SEED COUNTER MICRO CONTROLLER

• Light-weight, Heat treated & anodized, Good finish Provided with full blazed bottom ring, ensured for abrasion resistance and long life. Light in weight and portable, available in different storage. Capacity litre 5, 10, 15, 20, 30, 40 & 50 Stainless steel cans also available. Capacity litre : 2,5,10,20 & 40.
Add to wishlist
Quick View

Agriculture Equipment

NAP-29 ALUMINIUM MILK CAN