Add to wishlist
Made out of either brass or G. I. And wire mesh or perforated Mild Steel sheet, designed to confirm to specification set by .I.S. Standard sieves has 8” or 12” dia, 2” approx depth. Frames are skirted to nest together. Suitable for grain/seed grading.

NAP-11 SEED GRADING SIEVES

Made out of either brass or G. I. And wire mesh or perforated Mild
Steel sheet, designed to confirm to specification set by .I.S.
Standard sieves has 8” or 12” dia, 2” approx depth. Frames are
skirted to nest together. Suitable for grain/seed grading.

SKU: NAP-11 SEED GRADING SIEVES Category:

Reviews

There are no reviews yet.

Be the first to review “NAP-11 SEED GRADING SIEVES”

Related products

NAP-09 SEED TESTING KIT Seed testing kits are used to evaluate the quality of seeds, including their germination capacity, purity, and health. The results of seed testing help determine if seeds are suitable for planting and can help predict how well they will grow in the field. The main objective of seed testing is to assess the actual planting value of the seed in terms of its germination capacity besides determination of percentage composition of the pure seeds, weed seeds, other crop species, extraneous matter and moisture content of the submitted sample. Uses of seed testing kits Seed certification: Seed testing helps ensure that seeds are high quality and genetically pure. Seed treatment: Seed testing helps determine the best treatment for seeds. Quarantine: Seed testing helps prevent the spread of disease to new regions. Germination testing: Seed testing helps determine how many seeds will germinate in the field. Seed viability testing: Seed testing helps determine how many seeds are alive and how many are dead.
Add to wishlist
Quick View

Agriculture Equipment

NAP-09 SEED ANALYSIS KIT

Easy to use, economical, accurate, non-electrical with two pans and a hooper, scoop. Used for the easy dividing and reduction of bulk material samples with particle sizes ranging from less than 1 mm. up to a maximum of 10 mm. Consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width 1.2cm which discharge the material alliteratively in opposite directions into speculate panes. The chutes are steep enough to allow rapid flowing of the material for the rapid preparation of sample, i.e. division into two representative portions. Each constructed of heavy gauge sheet metal, with reinforcement of the portions to maintain accuracy of the slot dimensions. Complete with a cleaning brush. Models :- Models also available in stainless steel.
Add to wishlist
Quick View

Agriculture Equipment

NAP-03 RIFFLE DIVIDER

SEED SAMPLING PROBE
Add to wishlist
Quick View

Agriculture Equipment

NAP-24 SEED SAMPLING PROBE

Two types i.e Ceiling Suspended or steel stand supported with suspension chains to be suspended/hanged with the ceiling. Can also be fixed with support stands. Fabricated out of stainless steel frameworkofstainlesssteeltubularormildsteelwiththick SalientFeatures Efficiency :99.97% (or above) down to 0.3 micron. Blower Unit :Centri-balanced , Centrifugal motorized blower with 1/3 h.p. 1440 rpm Discharge :Air volume 90 cfm =10% Noise level :Below 65 db Illumination :Byfluorescenttubeasper sizeofworkingarea Germicidal :By ultra-violet tube (on Request)(Approx 50 microwattspersq. cmontheentireworksurface) Electrical : Controls are on the front facia of the chamber. Internal wirings are protected with heat resident material. Mains are through M.C.B. for higher protection against shock/damage. Manometer :Block type acrylic/Plexi-glass inclined Static Pressure Manometer or Dial type Magnehelic Differential Pressure Manometer (Optional) Support Stand: Stainless steel square pipe stand with levelling device (Optional) Filter : Standard HEPE filter Manipulated HEPA filter & hour meter for U.V. Tube & Blower (Optional) Supplied complete with : H.E.P.A. Filter, pre filter, Centribalanced, Centrifugal Air Succes s ion blower Unit, Flourescent Tube Light, UV tube, Static Pressure Manometer Standard Dimensions of working area: (I) 600 x 600 mm. (ii) 1200 x 600 mm. (iii) 1200 x 1200 mm. (iv) 1200 x 1200 mm. (v) 1800 x 1200 mm. Other sizes can be designed as per customer specification. Note : OptionalAccessories andTest Facilities at extra cost.
Add to wishlist
Quick View

Agriculture Equipment

NAP-20 SUSPENDED LAMINAR AIR FLOW UNIT

Backlight LCD display: This handheld digital grain moisture tester with a large LCD screen can display the data clearly. Back-light makes you easy to read and accurate in low light areas or night. Used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, feedstuff, powder. Grain Can Be Measured: rapeseed, sesame, soybean meal, cotton, soybean,peanut, barley, rice, sorghum, watermelon seed, paddy, wheat, maize, Fodder.
Add to wishlist
Quick View

Agriculture Equipment

NAP-32 MOISTURE GRAIN METRE

GRAIN/SEED DIVIDER BOERNER TYPE This Boerner Divider  is commonly used in seed laboratories and agricultural research institutions. The Boerner Divider reduces the size of a grain sample while maintaining the equal distribution of the original Sample. This is utilized to obtain representative samples of seeds for testing purposes. It helps in accurately dividing and reducing a bulk seed sample into smaller, manageable portions for further analysis. The basic operation of the Boerner Seed Divider involves pouring the bulk seed sample into the top of the device, which then uses a series of trays, chutes, and oscillating movements to separate and divide the seeds. The result is a set of sub-samples that are more representative of the entire seed lot. Made of Brass with Hopper capacity  1000 gm. No electricity is required to operate this divider. Mechanically operated this divider works on gravity principal  Provided with two collecting pans. Number of pockets are 38, Steel Legs and support.
Add to wishlist
Quick View

Agriculture Equipment

NAP-01 GRAIN/SEED DIVIDER BOERNER TYPE

Used for sampling free flowing, small seeded crops in bag or penetrable containers. It is ideal for clovers, timothy, brassicas, fine grasses such as bluegrass, and small vegetable seeds. Inserted horizontally into the container and the sample pours out of open end. 3/4 Inch diameter 20” overall length, one opening starts 2-3/8” from the tip and is 2-1/2 Inch long. Available in Brass or Stainless Steel. Available Size: 3/4Inch OD X 20” Single tube with one opening 1/2Inch OD X 20” Single tube with one opening
Add to wishlist
Quick View

Agriculture Equipment

NAP-25 NOBBE TRIER

NAP-17 ENVIRONMENTAL CHAMBER & HUMIDITY CABINET
Add to wishlist
Quick View

Agriculture Equipment

NAP-17 ENVIRONMENTAL CHAMBER & HUMIDITY CABINET