Add to wishlist
NPH-01 ROTAROD APPARATUS The RotaRod test is one of the oldest tests used for assessing motor coordination and balance in rodents. It provides a quick and simple estimation of neuromuscular coordination. The apparatus consists of a motorized, circular rod turning at a constant or increasing speed. Rota Rod is a measure of the amount of sedation or motor impairment imposed upon an animal undergoing an experimental therapy. Test involves placing the animal on a rotarod, and the time animal can remain on the rod before falling off is measured. The Rota Rod is a Digital motorized apparatus consist of a Horizontal rod which can rotates at a controlled speed.Rod is divided into multiple lanes. Speed of the Rod is adjusted using a motor control unit. Speed can be increased gradually or can be maintained at same speed. When animal falls from the Rod time is taken. Mild Steel construction with powder coated paint finish and steel rod of 25 mm diameter. Instrument has a Long trouble free life Each compartment is with time interval counter. Available in two compartment, three compartment Four and Five compartment models.

NPH-01 ROTAROD APPARATUS

With digital counter, For Determining neuro-pixicity, Muscle
tone, balance and motor co-ordination in rats and mice.
Consist of two , three or four Compartments of 75 mm. width each
with a rotating rod of 25 mm. diameter having speeds of
5,10,15,20 and r.p.m. With time interval counter in each
compartments.
(a) Two compartment.
(b) Three compartment.
(c) Four compartment

SKU: NPH-01 ROTAROD APPARATUS Category:

NPH-01 ROTAROD APPARATUS

The RotaRod test is one of the oldest tests used for assessing motor coordination and balance in rodents. It provides a quick and simple estimation of neuromuscular coordination. The apparatus consists of a motorized, circular rod turning at a constant or increasing speed.

Rota Rod is a measure of the amount of sedation or motor impairment imposed upon an animal undergoing an experimental therapy.

Test involves placing the animal on a rotarod, and the time animal can remain on the rod before falling off is measured.

The Rota Rod is a Digital motorized apparatus consist of a Horizontal rod which can rotates at a controlled speed.Rod is divided into multiple lanes.

Speed of the Rod is adjusted using a motor control unit. Speed can be increased gradually or can be maintained at same speed.

When animal falls from the Rod time is taken.

Mild Steel construction with powder coated paint finish and steel rod of 25 mm diameter.

Instrument has a Long trouble free life

Each compartment is with time interval counter.

Available in two compartment, three compartment Four and Five compartment models.

Reviews

There are no reviews yet.

Be the first to review “NPH-01 ROTAROD APPARATUS”

Related products

Tablet Disintegration Apparatus - Premium Laboratory Grade , High Precision Testing Mechanism For Reliable Results   Single Basket, Electrically operated for finding the disintegration time of different tablets. This instrument is for precise and consistent quality check of tablets. Essential equipment in pharmaceutical quality control Evaluates the time it takes for tablets to disintegrate in simulated gastric fluids Used For finding out disintegration time of different types of tablets. Six units are tested to provide the minimal statistical significance Tablet Disintegration Testing is a usefull instrument  in pharmaceutical quality control. Determines how rapidly tablets disintegrate and dissolve when exposed to specific conditions, mimicking the human digestive system. The electrically operated unit eliminates manual intervention, ensuring consistent and controlled testing conditions. It also reduces the risk of human error, guaranteeing accurate results. This unit is equipped with a single basket, making it ideal for smaller-scale testing or when working with limited samples. It's a versatile choice for laboratories with varying testing needs. Applications in Clinical, Pharmaceutical, Life Science and Industrial Laboratories Mild steel Strong powder coated body with all spares available.
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-25 TABLET DISINTEGRATION TEST APPARATUS SINGLE BASKET

NPH-28 DISSOLUTION RATE TEST APPARATUS Dissolution Tests are conducted to determine the drug release patterns, physiological availability and bioavailability of formulated drug products i.e for the determination of active drug ingredient in any pharmaceutical formulation – tablet or capsule. Dissolution apparatus are used throughout the product development life cycle, from Product release to stability testing and study of the product data from product to product. Then after passing or approval from the Quality control and Quality assurance, drugs are sent to markets. Dissolution test apparatus working principle: The dissolution test apparatus checks how fast a drug dissolves in your body. A tablet or capsule  is put in a container that has a medium that is prepared and operated just like the stomach or intestines functions (physiochemical conditions of the body). The container spins or moves around, and samples are taken to see how much of the medicine has dissolved over time. This helps to know how that drug works in a body. It also ensures the quality and efficacy of a product. The high head dissolution testing apparatus can be configured for1,2,3, 6 or 8 vessel configuration. Easy to operate, Accurate with Digital Timers and Digital RPM Controls. Easy to clean the bath with bottom drainage. Used in Analytical and Pharmaceutical industries. Apparatus Powder coated Mild steel body with front panel controls and a constant temperature water bath made of transparent acrylic. The round bottom glass jar of capacity 1000 ml are placed inside the bath. The jar are with  acrylic lid which allow passing of stirring shaft. The shaft is suspended from the top and is operated by the motor. The motor is electronically controlled to give speed precisely within ±1 RPM. The RPM is controlled digitally and is indicated on a digital display. Temperature is controlled by a fully solid state controller within ± 0.5°C. which maintains temperature at 37 Deg C with + 0.5 Deg C variations or Digital temperature controller. The basket assemblies and stirring paddles are of  stainlesssteel.Power required is 230 V ± 10% AC, 50 Hz
Add to wishlist
Quick View

Pharmacy Apparatus

NPH- 28 DISSOLUTION RATE TEST EQUIPMENT

ANALGESIOMETER
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-19 ANALGESIOMETER

NPH-06 DISINTEGRATOR Working : Four beaters revolving at high speed inside the machine pulverize material fed into it. The powder thus produced instantly passes through the screens in the lower part of the machine. This free escape of the ground material results in extremely rapid grinding with a fine and cool product. Laboratory Size, for Pharcy, industries, Electrical Motor Driven. Heavy Duty Powder coated mild steel construction. Size reduction in Disintegrator is done by Impacy. Works with four steel hammers. Voltage Required is 220 v 50 Hz A.C mails.
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-06 DISINTEGRATOR MOTOR DRIVEN

NPH-10 BOTTLE FILLING MACHINE ELECTRICAL The liquid filling machine operates on the principle of liquid pressure filling. When the pressure is high, the liquid flows into the bottle using its own weight. This process occurs when the pressure of the liquid reservoir matches the volume of air present in the bottle. This is Electrical Liquid Filling Machine A sturdy and heavy unit,Durable with long life. Premium quality ,Reliable Pharmacy product from PVG INTERNATIONAL Powder coated mild steel sheet. Contact parts are of Stainless Steel. Capacity of bottle filling machine is 50-500ml. Avaialable With Single Syringe or Double Syringe unit. For smooth operation, bottle liquid filling machine requires an electric supply of 220V A.C single phase.NPH-10 BOTTLE FILLING MACHINE ELECTRICAL The liquid filling machine operates on the principle of liquid pressure filling. When the pressure is high, the liquid flows into the bottle using its own weight. This process occurs when the pressure of the liquid reservoir matches the volume of air present in the bottle. This is Electrical Liquid Filling Machine A sturdy and heavy unit,Durable with long life. Premium quality ,Reliable Pharmacy product from PVG INTERNATIONAL Powder coated mild steel sheet. Contact parts are of Stainless Steel. Capacity of bottle filling machine is 50-500ml. Avaialable With Single Syringe or Double Syringe unit. For smooth operation, bottle liquid filling machine requires an electric supply of 220V A.C single phase.
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-10 BOTTLE FILLING MACHINE MOTORIZED

A Pfizer Type Tablet Hardness Tester is a device that measures the force needed to break a tablet or capsule. It's used in the pharmaceutical industry to test the strength of tablets and capsules before they're sold.  A handy, Strong, and direct dial reading type tablet hardness tester. Works with a single hand grip to generate the breaking force. Inexpensive but with accurate and faster results. A safe easy to use handy Pharmacy tool. Tablet Hardness Tester Pfizer Type which helps to test tablet hardness quickly, accurately & conveniently, the instrument is ideal for tablet hardness testing, very handy and potable, records quickly and directly on dial indicator the hardness reading upto 20 kgs with accuracy of 0. 5 kg, maximum tablet diameter 25mm. Heavy duty Powder coated steel body with strong spring.Records hardness quickly and directly on dial indicator. As thetablet is crushed by pressing the jaws of the instrument, the force is recordedon a dial indicator calibrated in force unit 1/5 kg. Squeeze of hand gripgenerates the breaking force. & Release of the hand pressure opens the jawsinstantly.
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-24 TABLE HARDNESS TESTER: PFIZER TYPE

A polishing pan is used to polish tablets and is used in conjunction with a tablet coating pan.  Made of Powder coated Mild steel to ensure long corrosion resistant life. DetatchablePolishing pan is provided with an inner lining of superior canvas cloth. The polishing pan is of canvas cloth, mounted on M.S frame, tighten fully with attachment. The affixed coupling provided on back, is suitable to affix / adjust on the shaft of drive, in place of the coating pan in the above machine, for carrying out polishing operation USES Polishing tablets in pharmaceutical and food industries Enhancing the appearance and flavour of products Protecting products from moisture, oxygen, and light Efficiently removes burrs, scratches, and surface imperfections from tablets  resulting in a smooth and polished finish.
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-22 POLISHING PAN

Placeholder
Add to wishlist
Quick View

Pharmacy Apparatus

NPH-27 TABLET DISINTEGRATION TEST APPARATUS SIX BASKET